A Gunpla grade is Bandai's label for how a kit is built: its scale, how many parts it has, and whether there is a jointed frame under the armour. The grade is printed at the front of every kit's name, so "MG 1/100 Strike Freedom Gundam" tells you the grade (Master Grade) and the scale (1/100) before you open the box. If this is your first kit, start with a High Grade, or an Entry Grade if you have no tools at all; which grade to build first below walks through a first build, and the best Gunpla for beginners names the kits to buy.
These are High Grade kits the shops we compare sell today:
Every kit, filed by grade with each shop's price, is on our Gunpla shelf.
Only a few Gunpla kits are sold by the shops we compare in the EU so far, so most grades below show one card or none. The grades work the same wherever you buy.
The grades at a glance
| Grade | Scale | Frame under the armour | Who it suits |
|---|---|---|---|
| Entry Grade (EG) | 1/144 | No | A first kit with no tools: the parts come off the runner by hand |
| High Grade (HG) | 1/144 | Usually not | Most builders, and the biggest range by far |
| Real Grade (RG) | 1/144 | Yes | Builders who want Master Grade detail at High Grade size |
| Master Grade (MG) | 1/100 | Yes | The step up once you have built a few High Grades |
| Perfect Grade (PG) | 1/60 | Yes | The biggest, most detailed kits Bandai make |
| SD (BB Senshi, SDCS, SD EX-Standard) | No fixed scale | Mostly not | Short, chunky, quick builds |
| Master Grade SD (MGSD) | No fixed scale | Yes | SD proportions with a Master Grade frame |
The scales come from Bandai's own kit names (every kit's title carries its grade and scale, for example "RG 1/144" or "PG 1/60"). Bandai list each of these as a separate brand on the Bandai Hobby site, alongside smaller lines such as RE/100, Full Mechanics and MGEX.
Entry Grade (EG): no tools needed
Entry Grade is Bandai's beginner grade. On its Entry Grade RX-78-2 Gundam page, Bandai describe a "touch gate specification that can be easily folded by hand without using nippers" and say "Just assemble the parts and you're done! No need to paint or even apply stickers!" The Entry Grade Nu Gundam uses the same touch gates. That makes EG the one grade you can build at the kitchen table with nothing else bought.
The trade-off is detail and range: there are far fewer EG kits than High Grades, and the shops we compare sell them in the UK only for now.
High Grade (HG): where most people start
High Grade is 1/144 scale and is most of the Gunpla range. The Australian retailer Hobbyco puts a High Grade at around 12.5 cm tall. Unlike EG, a High Grade needs nippers to cut the parts from the runner, and the Wayland Games grade guide notes that the stickers "can be a little finicky."
You will see several High Grade labels on boxes: HGUC, HGCE, HGAC, HGBF and others. They tell you which Gundam series the suit comes from (HGUC is the Universal Century, HGCE the SEED Cosmic Era), not a different grade. Two kits of the same suit under different labels are different kits, though, so read the whole name.
All of them: the High Grade shelf.
Real Grade (RG): Master Grade detail at 1/144
Real Grade kits are the same 1/144 scale as a High Grade, with a jointed frame inside and far more parts. Bandai's page for the RG RX-78-2 Gundam Ver.2.0 says the first RG, the RX-78-2 Gundam, was "released in July, 2010," and describes the new kit's "full-body interior frame." The small parts are the catch: Wayland recommend "having a few High-Grade kits or a Master Grade/Perfect Grade built" before an RG.
All of them: the Real Grade shelf.
Master Grade (MG): the usual next step
Master Grade is 1/100 scale, and Hobbyco puts a typical kit at "around 18 cm tall" with "an articulated inner frame, allowing for a greater range of motion." Wayland mention "clever extras like additional weapons, wings and pilots." A Master Grade takes longer than a High Grade but is larger and easier to handle than a Real Grade, which is why many builders step up to MG rather than RG.
Two labels inside MG matter when you buy. Ver.Ka (Ver. Katoki, as Bandai name the line) kits are redesigns by the mechanical designer Hajime Katoki, and Ver. 2.0 / 3.0 kits are newer versions of an earlier MG. Each is its own kit with its own box and price, not a repaint of the plain one.
All of them: the Master Grade shelf.
Perfect Grade (PG): the biggest kits
Perfect Grade is 1/60 scale, around 30 cm tall by Hobbyco's figure. Wayland describe "a full inner frame, pistons, screws, and metal parts" and call them "the largest kits you can get in the Gunpla range." PG Unleashed is a newer Perfect Grade line (the RX-78-2 among them); its kits carry "Unleashed" in the name and are separate kits from the older PGs.
All of them: the Perfect Grade shelf.
SD and MGSD: the super-deformed kits
SD kits are short and chunky, with a big head on a small body. Hobbyco puts them at "around 8cm tall" and "on the same level of build complexity as a high grade." There are several SD lines on Bandai's brand list: BB Senshi, SD Gundam Cross Silhouette (SDCS) and SD EX-Standard.
Master Grade SD is the exception: SD proportions with a jointed frame. Bandai's Gundam site describes the MGSD Freedom Gundam as condensing the internal frame of a Master Grade into an SD kit, and the Bandai Hobby page gives its height as about 115 mm. Bandai sell it as a grade of its own.
All of them: the SD shelf and the MGSD shelf.
The smaller lines
- RE/100 (Reborn One Hundred): 1/100 kits of less common suits. We list them on the RE/100 shelf.
- Full Mechanics: 1/100 kits that Hobbyco describes as less intricate than a Master Grade. We list the Gundam Aerial, Raider Gundam and Graze Ein.
- MGEX (Master Grade Extreme): Bandai's premium Master Grade line, listed on its own on Bandai's site. We list the MGEX Strike Freedom Gundam, MGEX Mighty Strike Freedom Gundam and MGEX Unicorn Gundam Ver.Ka.
- Mega Size: 1/48 kits, built simply but larger than a Perfect Grade. We list the RX-78-2 Gundam, Char's Zaku II and Unicorn Gundam (Destroy Mode).
- No grade: older and current kits Bandai sell with a scale and no grade mark, such as the 1/100 Gundam Leopard. They are on the no-grade shelf.
Mega Size Gundam: the 1/48 kits
Mega Size Model is Bandai's 1/48 line, and at that scale the RX-78-2 Gundam stands roughly 37.5 cm tall once built, according to retailer listings such as Mecha Express Australia. Retailers list the kit as snap-fit with no glue or tools needed (check the listing for your kit). It is larger than a Perfect Grade, so it suits a display piece or a gift.
Which Mega Size kits you can buy depends on where you are. In the UK shops sell the standard RX-78-2 Gundam, Char's Zaku II and the Unicorn Gundam (Destroy Mode). In the US the two on sale are Premium Bandai's Gundam Base Limited versions, the RX-78-2 Gundam in Metallic Gloss Injection and the RX-0 Unicorn Gundam Ver. TWC. These are the Mega Size kits sold in your market:
No shop we compare lists a Mega Size kit in this market yet. The nearest size we list is the Perfect Grade shelf, at 1/60.
If you want to finish one, our guides to panel lining and top coats and applying water slide decals cover the steps.
Which grade to buy first
- No tools, or buying for a child: an Entry Grade. The parts come off by hand.
- A first kit for an adult: a High Grade. It is the biggest range, it teaches the basics, and you need only nippers.
- You have built a few High Grades: a Master Grade for size and a frame, or a Real Grade if you want that detail at 1/144 and do not mind small parts.
- A long project: a Perfect Grade, once you know you enjoy the work.
Pick the suit you like most within the grade. The rules above hold whatever series it comes from.
Which grade to build first
For the kits to buy, see the best Gunpla for beginners.
If you have never built a Gunpla kit, three choices matter: the grade, the suit and the tools.
- Grade: an Entry Grade if you have no tools or are buying for a child, otherwise a High Grade. Both are 1/144 scale, so a first kit sits on the shelf at the same size as most of the range.
- Suit: the one you like. Every grade is built the same way whichever series the suit is from, and you will finish a kit you care about. If you have not picked a series yet, our Gundam timeline and watch order puts a kit beside every series.
- Tools: none for an Entry Grade. For a High Grade, a pair of nippers. Everything else can wait until the second kit.
These are beginner-friendly kits the shops we compare sell today, Entry Grades first:
For a High Grade, the one tool to buy with it is a pair of nippers. Bandai's own Entry Nipper is made for Gunpla runners, hobby cutters from Army Painter or Redgrass do the same job, and tweezers help place the stickers:

Precision side cutter for close sprue trimming
Army Painter

Stainless-steel sprue cutters for plastic and resin, max 3 mm, with protective cap
Redgrass Games

Set of modelling tweezers
Army Painter
What a first build involves:
- Open the manual first. Each step names the runner (the frame the parts sit on, lettered A, B, C) and the part number to cut.
- Cut each part off only when the step calls for it. Parts look alike once they are off the runner.
- Cut twice. With nippers, cut a little way from the part first, then trim the leftover stub (the gate) flush. Cutting flush in one go tends to stress the plastic and leave a white mark.
- Press parts together firmly. Gunpla snaps together; there is no glue.
- Stickers last. High Grade kits come with stickers or foil seals for the details; tweezers or the tip of a hobby knife place them more neatly than fingers.
Mistakes are cheap at this stage. A white stress mark or a rough gate is the most common one, and Gunpla tools explains how a single-blade nipper and a sanding stick deal with it.
Is RG or HG better?
It depends on the builder. Both are 1/144. A Real Grade has a frame inside and many more, smaller parts, so it looks more detailed and takes longer. A High Grade is quicker, sturdier in the hand and easier to pose straight out of the box. For a first kit, the High Grade is the safer buy.
What else you need
A High Grade needs nippers; everything else is optional. Our Gunpla tools guide covers nippers, sanding and a knife, the sprue cutter guide explains why a single-blade nipper leaves less to clean up, and panel lining and top coats covers the two finishing steps most builders add next.
Shop Gunpla kits
Gunpla kits, compared across every shop we track.
We earn a small commission from qualifying purchases at no extra cost to you.
Questions
What is the best Gunpla grade for beginners?
A High Grade (HG) for most first-time builders: 1/144 scale, the biggest range, and only nippers needed. An Entry Grade (EG) needs no tools at all, so it suits a child or someone with nothing to cut with.
What do the Gunpla grades mean?
Entry Grade and High Grade are 1/144 kits without a full inner frame; Real Grade is 1/144 with a frame and many more parts; Master Grade is 1/100 with a frame; Perfect Grade is 1/60, the biggest. SD kits are super-deformed, with no fixed scale.
Is RG or MG better for a second kit?
Many builders step up to a Master Grade: it has a frame and more detail, but its parts are larger and easier to handle than a Real Grade's. A Real Grade packs that detail into 1/144, with small parts.
What is a Mega Size Gundam?
Mega Size Model is Bandai's 1/48 Gunpla line. Retailers list the RX-78-2 at about 37.5 cm tall built, snap-fit with no glue or tools needed.
What tools do you need for Gunpla?
None for an Entry Grade. For every other grade, a pair of nippers to cut parts from the runner. A hobby knife, sanding sticks and a panel liner come later.




