Hobby SupermarketHobbySupermarket

PLA vs PLA+ for Terrain: What the Plus Changes

What a PLA+ spool changes, and when it is worth it for terrain

PLA+ is PLA its maker has modified to be tougher. It prints on the same settings and the same open printer, and it is worth it for terrain that gets handled: thin spires, railings and gantries that plain PLA might snap. For scenery that sits on a shelf or a table, plain PLA does the job. There is no standard for the "+": each maker sets its own formula, so one brand's PLA+ is not another's. These are 1 kg spools of plain PLA and PLA+ from the same three makers, Elegoo, SUNLU and eSUN, so you can compare each brand's two side by side on price:

ELEGOO PLA Basic Filament 1kg, Grey

PLA filament: the easiest material for terrain, scenery, props and display pieces · 1kg

ELEGOO

  • free delivery over €50 in most EU countries (€15 below); €100 threshold in Norway/Switzerland/Malta, Cyprus a flat €30 · 14-day returns
ELEGOO PLA+ Filament 1kg, Grey

Tougher, less brittle PLA+ filament · 1kg

ELEGOO

  • 30-day returns
  • 30-day returns
  • free delivery over €50 in most EU countries (€15 below); €100 threshold in Norway/Switzerland/Malta, Cyprus a flat €30 · 14-day returns
SUNLU PLA Filament 1kg, White

Standard PLA filament: the easiest material for terrain, props and display pieces · 1kg

SUNLU

  • 30-day returns
  • 30-day returns
  • free EU shipping from Frankfurt to most of Europe, 5-14 business days; a few countries (Denmark, Malta, Cyprus, Norway, Switzerland among them) pay extra at checkout · 14-day returns
SUNLU PLA+ Filament 1kg, White

Tougher, less brittle PLA+ filament · 1kg

SUNLU

  • 30-day returns
  • 30-day returns
  • free EU shipping from Frankfurt to most of Europe, 5-14 business days; a few countries (Denmark, Malta, Cyprus, Norway, Switzerland among them) pay extra at checkout · 14-day returns
eSUN PLA-Basic Filament 1kg, Grey

1.75 mm PLA filament for FDM printers · 1kg spool, 1.75 mm

eSUN

  • 30-day returns
  • 30-day returns
eSUN PLA+ Filament 1kg, Grey

1.75 mm PLA filament for FDM printers · 1kg spool, 1.75 mm

eSUN

  • delivery 4–10 working days · 14-day returns
  • 30-day returns
  • 30-day returns

Both are on the PLA filament page, where PLA+ and Pro lines are a filter, priced per kilo in your currency. Print settings for PLA, PLA+ and fourteen other filaments are in our filament temperature chart.

PLA vs PLA+ at a glance, on one maker's figures

Because each maker's PLA+ is its own, the fair comparison is one maker's plain PLA against the same maker's PLA+. eSUN publishes the same test figures for both on its PLA-Basic and PLA+ pages:

eSUN PLA-BasiceSUN PLA+
Nozzle temperature210-230 °C210-230 °C
Bed temperature45-60 °C45-60 °C
Part cooling fan100%100%
Impact strength, Izod (XY)3.25 kJ/m²7.27 kJ/m²
Tensile strength (XY)64.3 MPa70.4 MPa
Heat distortion53.7 °C53.8 °C
Drying50 °C for 8-12 hours50 °C for 8-12 hours

So on eSUN's numbers, PLA+ prints exactly like its PLA, takes more than twice the impact before it breaks, is a little stronger in tension, and copes with heat no better. eSUN describes it as "stronger and tougher than standard PLA, resisting breaks from handling or minor bumps". Other brands' PLA+ may differ in every row; their spool label and product page are the figures to trust.

What the plus does and does not do

It makes PLA less brittle. Plain PLA is stiff and snaps; Prusa says it "breaks along layers or into shards upon impact". A tougher PLA+ survives the knocks a terrain piece takes in a game or a figure case: a gantry caught by a sleeve, a ruin dropped off the table edge.

It does not make PLA heat-proof. eSUN's heat distortion figures are within a degree of each other, and Prusa says PLA softens above 60 °C. A PLA+ print left in a hot car can sag just like PLA. For heat, look at PETG, or ASA on an enclosed printer.

It does not change how you print. eSUN gives the same nozzle, bed and fan settings for both. Other makers set their own figures for their PLA+, which is why the label matters.

The PLA shelf files tough, impact-modified and high-temperature PLA lines under PLA+ as well (Elegoo PLA Pro, SUNLU PLA Meta, HT-PLA). High-temperature PLA is the exception to the heat point above: it is a different formula sold for heat, so read its maker's figures.

ELEGOO PLA Pro Filament 1kg, Grey

Tougher, less brittle PLA filament · 1kg

ELEGOO

  • 30-day returns
  • 30-day returns
  • free delivery over €50 in most EU countries (€15 below); €100 threshold in Norway/Switzerland/Malta, Cyprus a flat €30 · 14-day returns
SUNLU PLA Meta Filament 1kg, Grey

PLA Meta filament in soft macaron colours · 1kg

SUNLU

  • free EU shipping from Frankfurt to most of Europe, 5-14 business days; a few countries (Denmark, Malta, Cyprus, Norway, Switzerland among them) pay extra at checkout · 14-day returns
  • 30-day returns
  • 30-day returns
ELEGOO Rapid PLA+ Filament 1kg, Black

Tougher PLA+ filament tuned for high-speed printers · 1kg

ELEGOO

  • free delivery over €50 in most EU countries (€15 below); €100 threshold in Norway/Switzerland/Malta, Cyprus a flat €30 · 14-day returns

When to buy which

  • Plain PLA for most terrain, scatter, bases and display pieces, and for test prints. It holds crisp detail and is the easiest filament to print.
  • PLA+ for terrain that travels or gets handled, thin or tall parts, clips and pegs, and anything you have snapped in plain PLA before.
  • Neither for parts that must survive heat or real mechanical stress: that is PETG, ABS or ASA territory. See PETG vs PLA and PLA vs ABS.

Painting PLA and PLA+

Both prime and paint like a plastic kit: the same spray or brush-on primer, then acrylics, step by step in how to paint 3D prints. Our spray primer guide compares the cans.

Keep it dry

eSUN dries both at 50 °C for 8 to 12 hours; Prusa dries its own PLA at 45 °C for six hours. A damp spool of either strings and prints rough walls. See our filament storage guide and filament dryer guide. Our 3D print cost calculator shows what the plus adds to the cost of a print, from the spools sold in your region.

Other filament comparisons

Questions

Is PLA+ stronger than PLA?

Tougher, mainly. On eSUN's own figures its PLA+ takes more than twice the Izod impact of its PLA-Basic and is about 10% stronger in tension. Other makers' PLA+ differs, because there is no standard formula.

Does PLA+ need different settings?

eSUN gives the same settings for both, 210-230 °C at the nozzle and a 45-60 °C bed. Other brands set their own figures, so start from the spool label.

Is PLA+ more heat resistant than PLA?

Not usually. eSUN's heat distortion figures for its PLA and PLA+ are within a degree of each other. High-temperature PLA lines are sold for heat; for terrain left somewhere warm, PETG is the usual choice.

Is PLA Pro the same as PLA+?

Makers use both names for their own tougher PLA, and eSUN's PLA+ page itself is titled PLA Plus and PLA Pro. Treat each as that brand's formula and read its figures.

We compare the makers' published figures and the prices at the shops we track; we have not printed with these spools ourselves.

Price the hobby

Everything named on this site carries its price across the shops we track.

Hobby Supermarket

Prices on miniatures, paints, brushes, 3D printing and trading cards, compared across the shops we track in the UK, US, Europe, Canada and Australia.

Deals by email

Send me deals for
Tell us what you play (optional)
What are you into? (optional)
Which games?
Which card games?

As an Amazon Associate we earn from qualifying purchases. We also earn commission as a Wayland Games affiliate and through the eBay Partner Network, Awin and other retailer programmes. See how we make money.

Warhammer, Warhammer 40,000, Age of Sigmar, Citadel and Games Workshop are trademarks of Games Workshop Ltd. Magic: The Gathering is a trademark of Wizards of the Coast, Pokémon of Nintendo, Creatures and GAME FREAK, and Yu-Gi-Oh! of Konami. Other product and brand names belong to their owners. Hobby Supermarket is an independent, unofficial site, not affiliated with, endorsed or sponsored by any of them.

Featured on tools.cafe