Gunpla is moulded in colour, so you never have to paint it. For a first kit, the best Gunpla paint is a panel lining marker plus a matt top coat: the marker darkens the engraved lines, the top coat takes the toy shine off, and neither needs thinner. Go further and the choice is by job. Gundam Markers fix small details with no cleanup. Acrylic (Vallejo Mecha Color, Tamiya) is the low-smell way to repaint whole parts. Lacquer (Mr Color, AK Real Colors) is the toughest finish and the one other paints can go over.
One of each, from the shops we compare in your market:
Mr Hobby
Mr Hobby
AK Interactive
Vallejo
AK Real Colors
Vallejo
Vallejo
Gunpla paint: the four types at a glance
Model paints are sorted by what they are thinned with, and that decides where you can use them, how they smell and what they can go over.
| Type | Thinner | Best Gunpla job |
|---|---|---|
| Gundam Markers | None (pen) | Eyes, vents, small details, panel lines |
| Acrylic (Vallejo Mecha Color, Tamiya X and XF) | Water or acrylic thinner | Repainting parts indoors, details, weathering |
| Enamel (panel line washes, Tamiya Panel Line Accent Color) | Enamel thinner (mineral spirit type) | Panel line and weathering washes you wipe back |
| Lacquer (Mr Color, Tamiya LP, AK Real Colors, Alclad II) | Lacquer thinner | Full repaints with an airbrush, metallics, base coats |
Our acrylic vs enamel vs lacquer guide goes deeper on the chemistry. For Gunpla the short version is the layering rule below.
The layering order: lacquer, then enamel or acrylic
Each paint's thinner can soften paint made with a weaker solvent, so the strongest goes down first. Lacquer is the strongest, so it is the base coat. Enamel and acrylic thinners do not attack cured lacquer, so washes, details and touch-ups go on top. Enamel thinner can soften acrylic, though, so over acrylic paint wipe an enamel wash back gently, or put a gloss coat between them first.
| Under | Safe over it | Avoid |
|---|---|---|
| Bare plastic | Primer, acrylic, enamel wash, markers; lacquer in light coats | Flooding enamel thinner into stressed joints |
| Lacquer | Acrylic, enamel wash, markers, top coat | Heavy wet coats of more lacquer |
| Acrylic | Enamel wash wiped gently, markers, top coat | Lacquer, which can lift it |
| Enamel | Acrylic or a water-based top coat, once fully dry | Lacquer; heavy enamel thinner |
Tamiya's own page for its enamel Panel Line Accent Color says "Use on Tamiya Color lacquer or acrylic paints" (Tamiya), which is the rule in practice: lacquer or acrylic first, the enamel wash after. When in doubt, try the combination on a spare runner tag first.
Gundam Markers: the easiest Gunpla paint
Gundam Markers are paint in a pen, made by Mr Hobby (GSI Creos) for Bandai kits. They come in three working groups:
- Painting markers (the GM line and the colour sets) for eyes, sensors, vents and small parts the moulding gets wrong. Retailers list the standard markers as alcohol-based.
- Panel lining markers, in fine-tip, brush-tip and pour types, for the engraved lines. Gundam Planet describes the pour type as oil-based and warns against using it over paint, so use it on bare plastic or after a lacquer coat.
- Real Touch markers, softer tones for shading and weathering effects, with a blending pen to soften the edge.
Every marker type and code, and which to buy first, is in our Gundam Markers guide.
Mr Hobby
Mr Hobby
Mr Hobby
Mr Hobby
Mr Hobby
A set is the cheaper way to get the colours a first kit needs. The Gundam Marker sets are grouped by series and faction (the Basic Set, plus SEED, Zeon and MSV sets), and the Gundam Assemble Paint Pack 01 PA01 is a small pack of Gundam Assemble Color paints, made for the Gundam Assemble tabletop game. Every Gundam paint set we price is on the Gundam sets page, and every paint pen on the paint markers page.
Mistakes come off with Mr Hobby's Gundam Marker eraser while the ink is fresh.
Acrylic: the low-smell way to paint a whole kit
Acrylic is the paint to start with if you want to change a kit's colours and you paint indoors. It thins and cleans up with water or the maker's acrylic thinner, brushes well, and goes through an airbrush once thinned.
Vallejo Mecha Color is the acrylic range made for this job: robot and mecha colours, plus Mecha washes, weathering colours, varnishes and primers in the same line. It is the most widely stocked Gunpla-friendly range we track, sold in all five of our markets.
Vallejo
Vallejo
Vallejo
Vallejo
Vallejo
Vallejo
Tamiya Color acrylics (the X gloss and XF flat lines) are the other classic, in small jars, thinned with Tamiya's X-20A for the airbrush. Tamiya sells many colours as acrylic, lacquer and spray under one name, so each card below shows every format the shops in your market list.
Tamiya
Tamiya
Tamiya
In the US, Kaleido ColorWorks sells airbrush-ready colour sets built for mecha kits:
Lacquer: the toughest Gunpla paint
Lacquer dries fast and hard, levels to a smooth finish through an airbrush, and is the base every other paint can go over. It is also the strongest-smelling and needs real ventilation (a spray booth or an open window and a respirator). Most lacquer is sprayed; brushing it works for small areas but the fast drying shows brush marks.
Mr Color is the Gunpla builder's lacquer, from the same maker as the Gundam Markers, and includes Mr Color Gundam Color, matched to mobile suit schemes. AK Real Colors is AK's acrylic lacquer line, sold in all five of our markets. Tamiya LP is Tamiya's lacquer range.
AK Real Colors
AK Real Colors
AK Real Colors
AK Real Colors
For the metal frame and weapons, a lacquer metallic gives the smoothest finish. AK Xtreme Metal is sold in all five of our markets, Mr Hobby's metallics in fewer.
AK Interactive
AK Interactive
AK Interactive
AK Interactive
In the US you can also buy Alclad II, the lacquer metal finishes. Alclad's own directions say "a primer is necessary" on injection plastic kits, that "High-Shine ALCLAD finishes require a glossy base coat", and that it "should be sprayed at 12-15psi" (Alclad II directions).
Alclad II
Alclad II
Alclad II
Alclad II
Each paint wants its own thinner: Tamiya's X-20A for Tamiya acrylic, Vallejo's thinner for Mecha Color, and AK's High Compatibility Thinner for Real Colors. The airbrush thinner guide explains which thinner goes with which paint.
Panel lining: enamel washes and markers
Panel lining is the single step that most improves a straight build, and it has its own guide: how to panel line Gunpla. In short, an enamel wash flows into the line on its own and wipes back off the flat surface, and a panel lining marker draws the line without any thinner. Black suits dark and coloured armour; grey or brown reads better on white parts.
AK Interactive
AK Interactive
AK Interactive
Mig
Tamiya
Gunpla weathering: chipping, grime and soot
Gunpla weathering makes a kit look used: scratched paint, grime in the joints, soot around thrusters and dust on the feet. Do it after the panel lines and before the final matt coat, so the top coat seals it.
- Chipping: a sponge or fine brush with a dark brown, such as Vallejo Mecha's Chipping Brown, on edges that would take knocks.
- Grime and soot: enamel effects you wipe back, such as AMMO's Engine Grime, or weathering pencils that draw streaks straight onto a matt coat.
- Dust: a light wash or pigment on the feet and lower legs.
Vallejo
Vallejo
AK Interactive
AK Interactive
AK Interactive
Mig
Mig
Gunpla top coat: matt, satin or gloss
A Gunpla top coat is a clear varnish over the finished kit. It seals the panel lines, stickers and decals, makes the marks where parts were cut from the runner less visible, and turns plastic shine into a single even finish. Matt (flat) reads most like a scale model; satin keeps a soft sheen; gloss is for a shiny finish or a smooth coat under water slide decals.
Over markers and washes, start light. A heavy wet coat can make Gundam Marker ink or an enamel panel line run, and a lacquer clear is the most likely to do it. Mist the first passes on from further away, let them dry, then build up; or use a water-based (acrylic) top coat over enamel work.
Spray cans are the easiest way to top coat a whole kit. Spray in light passes, let each dry, and work somewhere ventilated. The Gundam Marker Clear Matte pen covers small touch-ups.

Matt anti-shine topcoat, 400ml aerosol
Army Painter

Matt clear coat sprayed over a finished paint scheme to protect it and kill shine · 500ml aerosol · Matt · United Kingdom · TCF-SPR-004 · 5060843100959
Colour Forge

Matt protective topcoat, aerosol · MPAR-V01
Monument
Matte clear topcoat in a Gundam Marker pen; water-based, goes over Gundam Marker colour · GM502
Mr Hobby
Bottled varnish for an airbrush gives more control. Vallejo's Mecha Varnish is part of the Mecha Color range and is water-based; AK's Flat Varnish and Mr Color Super Clear are the lacquer options.
Vallejo
Vallejo
Vallejo
Vallejo
AK Real Colors
Our matt varnish guide covers spray against brush-on and how to fix a cloudy coat.
Which Gunpla paint to buy first
- Straight build, first kit: a grey or black panel lining marker and a can of matt varnish. Nothing else.
- Fix the details: add a few Gundam Markers (eyes, vents, gold or silver trim) or a marker set.
- Repaint parts with a brush: Vallejo Mecha Color or Tamiya acrylic, a primer, and a fine brush.
- Full repaint with an airbrush: lacquer (Mr Color or AK Real Colors) for the base coats, acrylic or enamel for details and washes, and a matt top coat. The airbrush guide and spray booth guide cover the kit you need around it.
The cutting, sanding and tools side is in our Gunpla tools guide, and Gunpla grades explained and the best Gunpla for beginners help you choose the next kit. Everything Gunpla we price is on the Gunpla hub.
Questions
What is the best paint for Gunpla beginners?
A panel lining marker and a matt top coat for a first kit, then Gundam Markers for small details. If you want to repaint parts with a brush, a water-based acrylic such as Vallejo Mecha Color is the easiest to clean up and the least smelly.
What is the best top coat for Gunpla?
A matt spray varnish is the easiest for a whole kit; an airbrushed bottled varnish gives more control. Over Gundam Markers or enamel panel lines, start with light mist coats, or use a water-based varnish, so the lines do not run.
Can you use acrylic paint on Gunpla?
Yes. Hobby acrylics such as Vallejo Mecha Color and Tamiya X and XF stick to Gunpla plastic, best over a primer. Craft acrylics are thicker and coarser and are not made for model kits.
Do you need to top coat Gunpla?
No, but a top coat seals panel lines, stickers and decals so handling does not rub them off, and a matt coat makes nub marks and the plastic shine less obvious.
Gundam Marker or panel line wash: which is easier?
The marker is easier on a first kit because there is nothing to thin or wipe back. An enamel wash flows into the lines on its own, gives a softer line, and wipes back off the flat surface.
Can you put lacquer over acrylic?
Avoid it. Lacquer thinner can lift acrylic paint underneath. Lay lacquer down first, then acrylic or enamel on top.
We compare makers' published details and the prices at the shops we track; we have not painted these kits with these products ourselves.

![Gundam Assemble Paint Pack 01 [PA01]](/images/sets/gundam-assemble-paint-pack-01-pa01.webp)




