For gaming miniatures that get handled, picked up and packed into cases, an ABS-like resin is the safest choice: makers sell it as tougher and less brittle than standard resin. Standard resin is cheaper and fine for display pieces. Water-washable resin cleans up with water instead of isopropyl alcohol, at the cost of more brittle prints. These 1 kg bottles are sold by the shops we track in the most markets:
ABS-Like Resin V3.0 resin for 3D printing · 1kg
ELEGOO

General-purpose UV printer resin: the baseline chemistry, not water-washable · 1000g
ELEGOO

Water-washable UV printer resin tuned for 8K-display printers, second-generation formula · 1000g
ELEGOO
8K Standard Resin resin for 3D printing · 1 kg
ELEGOO
Resin for 3D printing · 1kg
Anycubic

General-purpose UV printer resin · 1kg
SUNLU
Every resin we track is on the resin shelf, where you can filter by type and bottle size. The grey bottles are shown here; most lines come in several colours.
Resin types compared
| Resin | Washed in | Strength | Best for |
|---|---|---|---|
| Standard | Isopropyl alcohol (IPA) or a similar solvent | Lower impact resistance than ABS-like, per Anycubic | Display pieces, busts, the cheapest per bottle |
| ABS-like | IPA, like standard | Tougher and less brittle than standard, per Anycubic | Gaming miniatures, thin weapons and spears, anything handled |
| Water-washable | Water | More brittle than normal resin, per Phrozen | Printing without handling alcohol |
| High-detail (8K and up) | IPA | Varies by line | Fine detail on high-resolution printers |
The washing and strength columns are the makers' own words: Phrozen's water-washable vs normal resin guide and Anycubic's ABS-like vs standard resin guide.
ABS-like resin: the best resin for gaming miniatures
Anycubic describes ABS-like resin as having "excellent strength and impact resistance" and "high elongation at break and not brittle", against standard resin's "lower impact resistance and less durability". It also notes that ABS-like resin needs "a slightly longer curing time" and costs more than standard.
For a wargamer, that toughness is what matters: a spear tip, a banner pole or a thin sword on a miniature that is picked up every turn. It washes in IPA like standard resin.
ABS-Like Resin V3.0 resin for 3D printing · 1kg
ELEGOO

ABS-like UV printer resin, tougher and less brittle than standard resin · 1000g
ELEGOO
ABS-Like for 3D printing · 1 kg
ELEGOO
8K ABS-Like Resin V3.0, for 3D printing · 2KG
ELEGOO

SUNLU's classic-formula ABS-like UV printer resin · 1kg
SUNLU
All of them are on the ABS-like resin filter.
Standard resin: cheapest, and fine for display
Anycubic calls standard resin "the most widely used material for resin 3D printing", with "excellent print resolution" and a wider choice of colours, and recommends it where looks matter more than toughness. For busts, display pieces and terrain details that sit on a shelf, it is the cheapest way to print.

General-purpose UV printer resin: the baseline chemistry, not water-washable · 1000g
ELEGOO

Standard UV printer resin (405 nm), general-purpose miniature and model printing · 1kg · Gray (#7E93A7)
Anycubic

General-purpose UV printer resin · 1kg
SUNLU

Standard UV printer resin with lower shrinkage and less brittleness · 1kg
SUNLU
Water-washable resin: no alcohol bath
Phrozen describes water-washable resin as "a type of 3D printing resin that can be cleaned with water instead of chemicals like isopropyl alcohol (IPA)", and says it "cuts down on unpleasant smells". The trade-off, in Phrozen's words, is that it "tends to be more brittle than normal resin" and is "more prone to cracking, especially when exposed to humidity or during handling".
The wash water is not harmless. Phrozen's instruction is: "Don't pour uncured water directly down the drain." Leave it in sunlight for a few days so the resin in it cures, filter that out, and dispose of it as rubbish.

Water-washable UV printer resin tuned for 8K-display printers, second-generation formula · 1000g
ELEGOO
Water-Washable Resin V2.0 resin for 3D printing · 1kg
ELEGOO
Resin for 3D printing · 1kg
Anycubic
Resin for 3D printing · 1kg
Anycubic
Some makers now sell a water-washable ABS-like resin, which aims to combine the two; they are on the water-washable filter.
High-detail and tough resins
Resins sold for 8K and higher printers (ELEGOO's 8K line, Creality's high-precision resin, SUNLU's 14K) are aimed at the finest pixels of the newest printers. Tough and engineering resins go further than ABS-like for strength, and cost more again.
8K Standard Resin resin for 3D printing · 1 kg
ELEGOO

UV-curing LCD printer resin, high-precision (8K) type · 1kg · Grey
Creality

High-resolution standard resin for 14K-class printers · 1kg
SUNLU

High-impact-strength UV printer resin for functional parts · 1000g
ELEGOO

Bio-based, lower-odour UV printer resin · 1kg
Anycubic
Bottle size and cost
A 1 kg bottle is the size to start with: it is the most widely stocked, and you find out whether you like a resin before you commit. Once you know which line you print most, compare it in 2 kg and 5 kg bottles: the resin shelf filters by bottle size, so you can check the price per kilo in your market.
After printing
Every resin print is washed and then cured under UV light before you paint it. Formlabs' rule for its own resins is to "always wash and fully dry parts before post-curing", and Phrozen says the same for its water-washable tough resin. Our curing guide compares the wash and cure stations, and the printers themselves are in the best resin 3D printer guide, with ELEGOO's two sizes compared in Elegoo Mars vs Saturn.
Once cured, a resin print primes and paints like any resin kit: see how to paint 3D prints.
Questions
What is the best resin for miniatures?
For gaming miniatures that are handled, an ABS-like resin, which makers sell as tougher and less brittle than standard resin. For display pieces, standard resin is cheaper, and Anycubic recommends it for fine-detailed prints.
Is water-washable resin worse?
It is more brittle. Phrozen says it tends to be more brittle than normal resin and more prone to cracking. Its advantage is washing in water instead of isopropyl alcohol.
Can I pour resin wash water down the sink?
No. Phrozen says not to pour uncured wash water down the drain. Leave it in sunlight so the resin cures, filter it out, and dispose of the solid as rubbish.
Does ABS-like resin contain ABS?
The name describes how it behaves. Anycubic says it mimics the properties of ABS plastic.
We compare what each maker says about its own resin and the prices at the shops we track; we have not printed with these resins ourselves.
