
28mm, 15mm, 1/144 and more
Miniature Scale Guide and Converter
Pick two scales and see how big one figure is next to the other, and what a 1.8 m person measures in each. Below it, what scale 40k, Bolt Action, D&D and Gunpla are, with starter boxes and kits you can buy in your country.
Start a 28mm heroic army
Compare two scales
28mm heroic figures are 1.67 times the size of 15mm
- A 1.8 m person at 28mm heroic
- 30 mm
- A 1.8 m person at 15mm
- 18 mm
- A 28 mm 28mm heroic figure at 15mm
- 16.8 mm
Sum: 1:100 ÷ 1:60 is 100 ÷ 60 = 1.67. A name like 28mm is a height from foot to eye, so its ratio is a convention, not a figure a maker prints.
Only products a shop in the UK has in stock are shown below, and a shelf stays empty where none is. Prices are on each card and are the shop's own, in pounds.
What scale is 40k?
Warhammer 40,000, Age of Sigmar and the Old World are 28mm heroic. Games Workshop prints no ratio, so "28mm" is the convention for a human model, measured from the sole of the foot to the eye. A "28mm heroic" figure is measured from the sole of the foot to the eye, not by a ratio, and it is bigger than life in the chest, hands and head. We convert it as an eye height of 1.68 m divided by 28mm, which is about 1:60. A true-scale 28mm figure measured to the top of the head is 1:56. Space Marines and other superhuman models stand taller, about 32 to 40mm, so 28mm names the line and not every model. Legions Imperialis is a different game at 8mm, and Epic and BattleTech are 6 to 10mm.
Heroic scale, and 28mm vs 32mm
Heroic scale means the figure is exaggerated, with a bigger head, hands and weapons, so it reads at arm's length. It is named by a height in millimetres, not by a ratio. 28mm against 32mm is a gap of 14 per cent: place a 32mm figure beside a 28mm one and it is plainly the taller. Makers have crept up in size over the years, so a figure sold today as 28mm can match an older 32mm one. Measure from foot to eye and compare bases before you mix ranges.
True scale is different: 1:56 is the usual listing for Warlord Games' 28mm, measured to the top of the head, so a 1.8 m person is 32.14 mm. That is why a true 28mm soldier looks smaller beside a heroic 28mm one.
What scale is Bolt Action?
Bolt Action is 28mm, which Warlord Games and most stockists list as 1/56 (some shops say 1/64). Its vehicles are 1/56 too, as are Black Powder, Hail Caesar, Pike & Shotte and Konflikt '47. Flames of War and Team Yankee are the 15mm games, about 1:100, so a 15mm tank is roughly half the height of a 28mm one.
15mm starter boxes (Flames of War and Team Yankee) are listed by the UK shops we compare; where your edition has none the shelf is empty.
D&D miniature size
The answer to "dnd miniature size" is set by the grid. A Medium creature takes one 5 foot square, which a 25mm (1 inch) base fills, and each size up takes a bigger base. The height varies by range; most roleplaying figures are 25 to 32mm tall.
| Size | Space on the grid | Base |
|---|---|---|
| Tiny | 2.5 ft (half a square) | about 12 to 15mm |
| Small | 5 ft | about 25mm (1 inch) |
| Medium | 5 ft | about 25mm (1 inch) |
| Large | 10 ft | about 50mm (2 inches) |
| Huge | 15 ft | about 75mm (3 inches) |
| Gargantuan | 20 ft or more | 100mm (4 inches) or more |
Source: The Dungeons & Dragons 5e System Reference Document, Creature Size table: the space each size takes on the grid. The base column is the usual 1 inch square converted to millimetres.
6mm, 8mm, 10mm and 35mm
Smaller scales put whole armies on a table: Legions Imperialis is 8mm, Epic Warpath 10mm, BattleTech 6mm. Star Wars: Legion goes the other way at 35mm, bigger than heroic 28mm. A 1.8 m person is 6.32 mm at 6mm and 37.5 mm at 35mm.
What scale is 1/144? Gunpla grades
1/144 means the model is 144 times smaller than the real thing. Bandai sorts Gunpla by grade, and each grade is a scale: High Grade, Real Grade and Entry Grade are 1/144, Master Grade is 1/100 and Perfect Grade is 1/60. The last column is the height of an 18 metre Gundam at that scale.
| Grade | Scale | 18 m Gundam | Note |
|---|---|---|---|
| Entry Grade (EG) | 1:144 | 125 mm | Snap-fit, no tools; the same height as a High Grade. |
| First Grade (FG) | 1:144 | 125 mm | A simpler, older 1/144 line. |
| High Grade (HG) | 1:144 | 125 mm | The common size: an 18 m Gundam is 125mm. |
| Real Grade (RG) | 1:144 | 125 mm | Same height as High Grade, with an inner frame and more parts. |
| U.C. Hard Graph (UCHG) | 1:144 | 125 mm | A High Grade size line for the Universal Century. |
| No Grade | No fixed ratio | Read the box: it is one scale or the other. | |
| Master Grade (MG) | 1:100 | 180 mm | An 18 m Gundam is 180mm. |
| Full Mechanics (FM) | 1:100 | 180 mm | The 1/100 line with a simpler build than Master Grade. |
| RE/100 | 1:100 | 180 mm | Reborn one hundred, 1/100. |
| Hi-Resolution Model (HiRM) | 1:100 | 180 mm | A large 1/100 line. |
| MGEX | 1:100 | 180 mm | Master Grade Extreme: 1/100 with a premium frame. |
| Perfect Grade (PG) | 1:60 | 300 mm | An 18 m Gundam is 300mm. |
| Mega Size | 1:48 | 375 mm | The name of the line in our catalogue says 1/48. |
| SD Gundam | No fixed ratio | No ratio, by design. | |
| MGSD | No fixed ratio | No ratio, by design. | |
| HaroPla | No fixed ratio | No ratio. |
1/144 High Grade
1/144 Real Grade
1/100 Master Grade
1/60 Perfect Grade
Model scale ratios: 1:24, 1:35, 1:48, 1:72, 1:144
A ratio is a definition: at 1:35 one unit on the model is 35 on the real thing. The last column is what a 1.8 m person measures.
| Scale | Used for | 1.8 m person |
|---|---|---|
| 1:12 | 12 inch figures, large model kits | 150 mm |
| 1:24 | model cars, large aircraft kits | 75 mm |
| 1:32 | 54mm figures, large military vehicles | 56.25 mm |
| 1:35 | armour and military figure kits | 51.43 mm |
| 1:48 | aircraft kits, Gunpla Mega Size | 37.5 mm |
| 1:56 (28mm) | 28mm true scale, Bolt Action | 32.14 mm |
| 1:60 | Gunpla Perfect Grade | 30 mm |
| 1:72 (20mm) | 20mm soldiers, plastic aircraft and tanks | 25 mm |
| 1:100 (Master Grade) | Gunpla Master Grade and RE/100 | 18 mm |
| 1:144 (High Grade) | Gunpla High Grade, small aircraft | 12.5 mm |
| 1:200 | Blood Red Skies aircraft | 9 mm |
| 1:300 | Cruel Seas ships | 6 mm |
| 28mm heroic | Games Workshop humans, most 28mm fantasy | 30 mm |
| 32mm heroic | larger 32mm ranges | 34.29 mm |
| 35mm | Star Wars: Legion | 37.5 mm |
| 15mm | Flames of War, Team Yankee | 18 mm |
| 10mm | Epic Warpath, 10mm historical | 10.71 mm |
| 8mm | Legions Imperialis | 8.57 mm |
| 6mm | BattleTech, 6mm historical | 6.32 mm |
The scale of every game we list
"How sure" says where each scale comes from: stated is the maker's own words, listed is how the maker or a stockist lists the range, convention is what players measure when the maker prints no ratio, and unconfirmed means we found nothing and print no ratio.
| Game | Scale | Ratio | How sure | Why |
|---|---|---|---|---|
| Warhammer 40,000 | 28mm heroic | 1:60 | convention | Human infantry are about 28mm foot to eye on a 25 to 32mm base; Space Marines are bigger (about 32 to 40mm) because they are superhuman, so "28mm" names the line, not every model.Source: Games Workshop publishes no ratio for its human-sized models; 28mm is the community convention for a modern plastic Games Workshop human, measured foot to eye. |
| Age of Sigmar | 28mm heroic | 1:60 | convention | Heroic 28mm. Stormcast Eternals and Orruks are larger than a human, so the scale names the line, not each model.Source: Games Workshop publishes no ratio for its human-sized models; 28mm is the community convention for a modern plastic Games Workshop human, measured foot to eye. |
| Horus Heresy | 28mm heroic | 1:60 | convention | Same heroic 28mm convention as 40k; the Legiones Astartes are superhuman and stand taller than a human.Source: Games Workshop publishes no ratio for its human-sized models; 28mm is the community convention for a modern plastic Games Workshop human, measured foot to eye. |
| Legions Imperialis | 8mm | 1:210 | convention | Called 8mm by makers and stockists. We convert it as 8mm foot to eye, about 1:210, a convention and not a figure the maker prints.Source: Games Workshop and its stockists call the range 8mm, and Warhammer Community says the models were resized to match Adeptus Titanicus and Aeronautica Imperialis. Games Workshop prints no ratio. |
| The Old World | 28mm heroic | 1:60 | convention | Heroic 28mm: the Old World keeps the Warhammer Fantasy Battle scale, on square bases.Source: Games Workshop publishes no ratio for its human-sized models; 28mm is the community convention for a modern plastic Games Workshop human, measured foot to eye. |
| Necromunda | 28mm heroic | 1:60 | convention | Heroic 28mm skirmish models.Source: Games Workshop publishes no ratio for its human-sized models; 28mm is the community convention for a modern plastic Games Workshop human, measured foot to eye. |
| Warcry | 28mm heroic | 1:60 | convention | Heroic 28mm: the models are Age of Sigmar scale.Source: Games Workshop publishes no ratio for its human-sized models; 28mm is the community convention for a modern plastic Games Workshop human, measured foot to eye. |
| Warhammer Underworlds | 28mm heroic | 1:60 | convention | Heroic 28mm: the warbands are Age of Sigmar scale.Source: Games Workshop publishes no ratio for its human-sized models; 28mm is the community convention for a modern plastic Games Workshop human, measured foot to eye. |
| Blood Bowl | 28mm heroic | 1:60 | convention | Heroic 28mm convention; players are chunky, so heights vary by position.Source: Games Workshop publishes no ratio for its human-sized models; 28mm is the community convention for a modern plastic Games Workshop human, measured foot to eye. |
| Middle-earth SBG | 28mm heroic | 1:60 | convention | Heroic 28mm convention; hobbits and dwarves are small, so heights vary by race.Source: Games Workshop publishes no ratio for its human-sized models; 28mm is the community convention for a modern plastic Games Workshop human, measured foot to eye. |
| Bolt Action | 1:56 (28mm) | 1:56 | listed | 28mm true scale: a 1.8 m soldier is about 32mm to the top of the head, which is 1:56. Treat the ratio as the usual listing, not a figure printed on the box.Source: Warlord Games sells Bolt Action as a 28mm range, and its store and many stockists give the scale as 1/56 (some retailers give 1/64). Warlord's own Bolt Action page prints no ratio. |
| Black Powder | 1:56 (28mm) | 1:56 | listed | Warlord's own figures are 28mm. Players also use 15mm and 10mm figures with the rules.Source: Warlord Games sells Black Powder as a 28mm (usually listed as 1/56) range; the rules are scale-agnostic. |
| Hail Caesar | 1:56 (28mm) | 1:56 | listed | Warlord's own figures are 28mm. Players also use smaller scales with the rules.Source: Warlord Games sells Hail Caesar as a 28mm (usually listed as 1/56) range; the rules are scale-agnostic. |
| Pike & Shotte | 1:56 (28mm) | 1:56 | listed | Warlord's own figures are 28mm.Source: Warlord Games sells Pike & Shotte as a 28mm (usually listed as 1/56) range. |
| Konflikt '47 | 1:56 (28mm) | 1:56 | listed | Same scale as Bolt Action, so the two games share figures and terrain.Source: Warlord Games sells Konflikt '47 as a 28mm range sharing Bolt Action figures and vehicles. |
| Achtung Panzer! | 1:56 (28mm) | 1:56 | listed | The game is played with 1/56 vehicles. The rules do not require it, but that is the scale Warlord sells.Source: A Warlord Games starter set for the game lists its tanks as 1/56th scale hard plastic. |
| Blood Red Skies | 1:200 | 1:200 | listed | Aircraft models, so the ratio is the scale; there is no human figure.Source: Warlord Games and its stockists list Blood Red Skies aircraft as 1/200 scale. Warlord's own game page prints no ratio. |
| Cruel Seas | 1:300 | 1:300 | stated | Small warships and boats at 1:300.Source: Warlord Games describes Cruel Seas as a 1/300th scale tabletop miniatures game. |
| Victory at Sea | Varies | unconfirmed | Naval ships; we print no ratio rather than guess one. Check the maker's own page before mixing it with other ships.Source: No maker statement of the scale was found when this table was written. | |
| Black Seas | Varies | unconfirmed | Sailing ships; we print no ratio rather than guess one.Source: No maker statement of the scale was found when this table was written. | |
| Antares | 28mm heroic | 1:60 | listed | Sold as 28mm science fiction; models are heroic, so we convert it as 28mm foot to eye, not as true 1:56.Source: Beyond the Gates of Antares is sold by Warlord Games and its stockists as a 28mm range. |
| 2000 AD | 28mm heroic | 1:60 | listed | Sold as 28mm science fiction; models are heroic, so we convert it as 28mm foot to eye, not as true 1:56.Source: Warlord Games sells its 2000 AD and Judge Dredd range as 28mm. |
| Erehwon | Varies | unconfirmed | Left without a ratio rather than guessed.Source: No maker statement of the scale was found when this table was written. | |
| Oathmark | 28mm heroic | 1:60 | listed | 28mm heroic fantasy.Source: Mantic Games sells Oathmark as a 28mm fantasy range. |
| Osprey skirmish | Varies | varies | No single scale applies across the games; most are played with 28mm figures.Source: Osprey Games publishes several skirmish games, each with its own figure scale; the rules are scale-agnostic. | |
| Skirmish | Varies | varies | No single scale applies; check the game. Most use 28mm figures.Source: This shelf holds skirmish games from several makers. | |
| Historicals | Varies | varies | Scale varies by range; the product name says it.Source: Historical figure ranges come in 6mm, 10mm, 15mm, 20mm, 28mm and 54mm. | |
| Reaper | 28mm heroic | 1:60 | listed | Heroic 28mm for roleplaying: a Medium creature stands on a 1 inch (25mm) base.Source: Reaper Miniatures sells its range as 25 to 28mm, aimed at roleplaying and tabletop games. |
| Gunpla | Varies | stated | See the grade table: 1/144, 1/100, 1/60 or 1/48 depending on the grade.Source: Bandai sorts Gunpla by grade, and each grade has its own scale. | |
| Gundam Assemble | Varies | unconfirmed | A Bandai wargame; no ratio printed.Source: No maker statement of the scale was found when this table was written. | |
| Kings of War | 28mm heroic | 1:60 | listed | Heroic 28mm fantasy.Source: Mantic Games sells Kings of War miniatures as 28mm. |
| Armada | Varies | unconfirmed | Naval game; we print no ratio rather than guess one.Source: No maker statement of the scale was found when this table was written. | |
| Deadzone | 28mm heroic | 1:60 | listed | Sold as 28mm; Mantic figures are heroic, so treat the ratio as a convention.Source: Mantic Games and its stockists list Deadzone as a 28mm science fiction game. |
| Firefight | 28mm heroic | 1:60 | listed | As Deadzone.Source: Mantic Games and its stockists list Firefight as 28mm scale, sharing models with Deadzone. |
| Epic Warpath | 10mm | 1:168 | listed | About 10mm foot to eye, which is about 1:170, a convention and not a figure the maker prints.Source: Mantic Games and its stockists list Epic Warpath as 10mm scale. Mantic's game page prints no ratio. |
| Halo: Flashpoint | Varies | unconfirmed | Left without a ratio rather than guessed.Source: No maker statement of the scale was found when this table was written. | |
| Star Wars: Legion | 35mm | 1:48 | listed | Players call it 35mm; we convert it as 35mm foot to eye, about 1:48.Source: Atomic Mass Games sells Star Wars: Legion as a 35mm scale game. |
| Star Wars: Shatterpoint | Varies | unconfirmed | Left without a ratio rather than guessed.Source: No maker statement of the scale was found when this table was written. | |
| Marvel: Crisis Protocol | Varies | unconfirmed | Left without a ratio rather than guessed.Source: No maker statement of the scale was found when this table was written. | |
| Conquest | 28mm heroic | 1:60 | listed | Heroic 28mm fantasy.Source: Para Bellum sells Conquest as a 28mm range. |
| BattleTech | 6mm | 1:285 | listed | 6mm is the usual BattleTech scale, about 1:285.Source: Catalyst Game Labs and its stockists list BattleTech miniatures as 6mm. |
| Flames of War | 15mm | 1:100 | convention | 15mm is nominal. We convert it at 1:100, which is what 15mm means to wargamers.Source: Battlefront describes the range as 15mm; the ratio is commonly given as 1:100. Not re-checked against the maker's page when this table was written. |
| Team Yankee | 15mm | 1:100 | convention | Same scale and same maker as Flames of War.Source: Battlefront describes the range as 15mm; the ratio is commonly given as 1:100. Not re-checked against the maker's page when this table was written. |
| Infinity | 28mm heroic | 1:60 | listed | Heroic 28mm science fiction, the usual listing; not a figure Corvus Belli prints on the box.Source: Stockists list Corvus Belli's Infinity as 28mm: Noble Knight files the line as "Infinity (28mm)" and Miniature Market lists "28mm (1:64 scale)" (both read through a web search, 2026-11-20). Corvus Belli's own Infinity page, fetched 2026-11-20, prints no scale in the page it serves. |
| Warcrow | Varies | unconfirmed | Left without a ratio rather than picking between two listings.Source: No maker statement found (2026-11-20), and stockists disagree: Miniature Market lists Warcrow kits as "32mm (1:54 scale)" and Beasts of War calls it a 32mm game, while Wayland Games and Noble Knight list it as 28mm. | |
| Fallout: Wasteland Warfare | 32mm heroic | 1:52.5 | listed | The maker gives 32mm scale; it prints no ratio, so the 32mm heroic conversion is ours.Source: Modiphius's own Fallout: Wasteland Warfare page (modiphius.net/pages/discover-tabletop-fallout-wasteland-warfare, read 2026-11-20): "play in apocalyptic games with 3-30 high quality 32mm scale miniatures". |
| Warmachine | Varies | listed | 30mm as listed. The converter has no 30mm row, so no ratio is printed rather than borrowing the 28mm or 32mm one.Source: Stockists list Steamforged's Warmachine MkIV as 30mm (Miniature Market labels its Cygnar Storm Legion starter "30mm Scale"; read through a web search, 2026-11-20). No Steamforged statement of the scale was found; its site answered 429 on 2026-11-20 and was not asked again. | |
| StarCraft | 32mm heroic | 1:52.5 | listed | 32mm as listed; not a figure Archon prints on the box.Source: Stockists list Archon Studio's StarCraft Tabletop Miniatures Game as 32mm: Miniature Market gives "Archon Studio 32mm (1:54 scale)" on its starter sets (read through a web search, 2026-11-20). Archon's own Marine page, fetched 2026-11-20, lists 32mm bases and no figure scale. |
Miniature scales, answered
What scale is 40k?
Warhammer 40,000 is a heroic 28mm game. Games Workshop prints no ratio, so 28mm is the convention: a human infantry model is about 28mm from the sole of the foot to the eye. Treated as a ratio that is about 1:60. Space Marines are superhuman and stand taller, around 32 to 40mm, so 28mm names the line and not every model.
What scale is Bolt Action?
Bolt Action is 28mm, which Warlord Games and most stockists list as 1/56 scale (a few shops say 1/64, so check the box before mixing makers). That is a true scale, not a heroic one: a 1.8 m soldier stands about 32mm tall to the top of the head. Its vehicles are 1/56 as well, so tanks, soldiers and terrain match.
What is heroic scale?
Heroic scale means the figure is bigger than life in the head, hands and weapons so it reads well at arm's length, and it is named by its height in millimetres from the foot to the eye, not by a ratio. A "28mm heroic" figure and a "1:56" figure are close in height but are not the same thing, which is why a ratio for heroic scale is always a convention.
What is the difference between 28mm and 32mm miniatures?
A 32mm figure is about 14 per cent taller than a 28mm one (32 divided by 28). Placed side by side the difference is plain, especially in the chest and weapons. Makers have crept up in size over the years, so a figure sold as 28mm today can match an older 32mm one. Check the bases and measure from foot to eye before mixing ranges.
What size are D&D (dnd) miniatures?
Most are 25 to 32mm tall on a 25mm (1 inch) base, because a Medium creature takes one 5 foot square of the grid. Large creatures take a 2 inch base, Huge 3 inches and Gargantuan 4 inches or more. The height varies by range, but the base is what the grid cares about.
What does 1/144 scale mean?
1/144 means the model is 144 times smaller than the real thing. An 18 metre Gundam is 125mm tall at 1/144, which is the Gunpla High Grade, Real Grade and Entry Grade size. At 1/100 (Master Grade) the same Gundam is 180mm, and at 1/60 (Perfect Grade) it is 300mm.
What scale is Flames of War?
Flames of War and Team Yankee are 15mm, which wargamers take as about 1:100. The "15mm" is nominal, like 28mm, so treat the ratio as close and not exact.
How do I convert a size from one scale to another?
Multiply the real size by the model scale, or compare two scales by dividing their denominators. A 1:56 figure against a 1:72 one is 72 divided by 56, so the 1:56 figure is about 1.29 times taller. The converter above does it and shows what a 1.8 m person measures in each.
Find the kits on the boxes and kits shelves, then paint them with the paint catalogue. More free tools on the tools page.



































