Hobby SupermarketHobbySupermarket

Airbrush Thinner: What to Thin Airbrush Paint With

Thinner, flow improver, retarder or water, and how thin is thin enough

Most airbrush trouble is paint trouble. Paint that is too thick spits, clogs the nozzle and dries rough; paint that is too thin runs and pools. An airbrush thinner fixes the first problem without causing the second, which is why every paint maker that sells an airbrush range also sells one.

The thinners and flow improvers below are the ones most miniature painters reach for, with prices from the shops we track in your market:

Vallejo Model Air Thinners (60ml)

Vallejo

  • free UK delivery over £75, from £2.66 below that · dispatched within 1 working day · 30-day returns
  • postage per seller
  • £4.99 UK delivery, 1–2 working days, free over £65 · 60-day returns
Vallejo Airbrush Flow Improver (60ml)

Vallejo

  • free UK delivery over £75, from £2.66 below that · dispatched within 1 working day · 30-day returns
  • £4.99 UK delivery, 1–2 working days, free over £65 · 60-day returns
  • postage per seller
AK Interactive Airbrush Flow Improver 100ml

AK Interactive

  • postage per seller
  • free UK delivery over £75, from £2.66 below that · dispatched within 1 working day · 30-day returns
  • postage per seller
Tamiya Acrylic Thinners X-20A (250ml)

Tamiya

  • free UK delivery over £75, from £2.66 below that · dispatched within 1 working day · 30-day returns
  • postage per seller
  • postage per seller
KT101 Airbrush Thinner 60ml

Kaleido Colorworks

  • postage per seller
  • postage per seller
  • postage per seller
Air Caste Thinner

Citadel (Warhammer Paints)

from £4.03· compare 3 shops· priced 16 Nov
Retarder

AK Interactive

from £2.48· compare 3 shops· priced 13 Sep
from was £2.35, now £2.24 with our link· compare 3 shops· priced 18 NovExclusive: 5% off using our link only

Thinner, flow improver, retarder: what each one does

Airbrush thinner reduces the paint's thickness while keeping its binder in balance. Thinning with plenty of water alone dilutes the binder that holds the pigment to the model, which is why over-watered paint can dry patchy or rub off. A maker's thinner is paint without the pigment, so you can thin further before that happens.

Flow improver makes paint move through the airbrush more easily and slows the drying at the nozzle tip a little. It is the fix for tip dry, the crust of dried paint that builds on the needle and makes the spray splutter. You add a few drops, not a large share of the mix.

Retarder slows drying more strongly. It helps on a warm day or with a paint that dries very fast, and it is the one to use sparingly: too much and the paint stays tacky and runs.

Water works, especially distilled or deionised water, which leaves no mineral spots. For many acrylics, a mix of the maker's thinner and a little water is fine. The more you rely on water alone, the sooner you hit the patchy, weak-binder problem.

Which thinner goes with which paint

The safe rule: thin a paint with its own maker's thinner. Mixing brands usually works for water-based acrylics, but if a mix goes lumpy or stringy, the first thing to change is the thinner.

Vallejo (Model Air, Game Air, Xpress Color). Model Air and Game Air are sold already thinned for the airbrush, so they often need only a few drops of Vallejo Airbrush Thinner or Flow Improver, and sometimes nothing. Vallejo Model Color and Game Color, the brush ranges, need thinning a lot more. Vallejo's Metal Color is also made for the airbrush.

Citadel (Air range). Citadel's Air paints are pre-thinned and come in 24 ml pots. Games Workshop's own thinner for them is Air Caste Thinner. To airbrush the standard Base and Layer pots instead, you need to thin them much further.

Army Painter (Warpaints Air). Sold airbrush-ready in 18 ml bottles, and Army Painter also sells an airbrush medium and a Warpaints retarder. Brush-range Warpaints need thinning as you would any pot paint.

Tamiya acrylics. Tamiya's acrylics are thinned with X-20A, its own acrylic thinner, rather than water. Scale modellers often thin Tamiya with lacquer thinner instead, which works but is solvent and needs proper ventilation. Lacquer and enamel paints need their own thinners; acrylic vs enamel vs lacquer model paint explains which goes over which.

AK Interactive (3rd Generation acrylics). AK sells its own acrylic thinner and an airbrush flow improver to go with its acrylic ranges.

Monument Pro Acryl and other pot paints. Brush paints all need thinning for the airbrush, more than you would thin them for the brush. Start with a maker's thinner or a universal acrylic thinner, add flow improver if tip dry starts, and test on a scrap first.

How thin should airbrush paint be?

There is no single ratio, because every paint starts at a different thickness and every airbrush, needle and pressure behaves differently. The usual target is the consistency of skimmed milk: it should run freely off a stirring stick and coat the inside of the cup thinly.

  1. Start with pre-thinned airbrush paint if you have it (the airbrush paint ranges compared). Spray a test line on card before adding anything.
  2. For a pot paint, start at roughly one part thinner to one part paint, mix well, and spray a test.
  3. Spitting or a grainy line means too thick: add thinner a few drops at a time.
  4. Spidery runs or puddles mean too thin, or too close, or too much pressure: add paint, back off, or turn the pressure down.
  5. Tip dry that keeps coming back means a drop of flow improver, or a little retarder on a hot day.

Write down the mix that worked for each paint. It saves the test next time. A fine nozzle wants thinner paint than a wide one; our best airbrush for miniatures guide covers nozzle sizes and which airbrush to start with.

Thinner is not airbrush cleaner

Thinner goes into the paint. Airbrush cleaner goes through the airbrush afterwards to break down dried paint, and it can contain solvents you do not want in a paint mix. Keep both on the desk, and see how to clean an airbrush, and the best airbrush cleaner for the routine and which cleaner suits your paint.

Vallejo Airbrush Cleaner (85ml)

Vallejo

  • free UK delivery over £75, from £2.66 below that · dispatched within 1 working day · 30-day returns
  • £4.99 UK delivery, 1–2 working days, free over £65 · 60-day returns
  • postage per seller
Army Painter Airbrush Cleaner (100ml)

Army Painter

  • postage per seller
  • postage per seller
  • postage per seller
Green Stuff World Airbrush Cleaner (60ml)

Green Stuff World

  • postage by parcel weight and destination, shown at checkout; no free-shipping threshold · 7-day returns
  • free UK delivery over £20, 2–3 working days · 14-day returns
  • postage per seller

Questions people ask

Can I use water as airbrush thinner? Yes, for most water-based acrylics, ideally distilled water. Used alone and in large amounts it weakens the paint's binder, so a maker's thinner, or a mix of thinner and water, gives a tougher finish.

What is the difference between airbrush thinner and flow improver? Thinner makes the paint thinner. Flow improver mainly stops the paint drying on the nozzle tip and helps it flow; you add only a few drops.

Do I need to thin Vallejo Model Air? Often not much. It is sold ready for the airbrush, but a few drops of thinner or flow improver help at low pressure or with fine nozzles.

Can I use isopropyl alcohol to thin airbrush paint? Some painters do, because it speeds drying, but it can make acrylics go stringy and is better kept for cleaning. A maker's thinner is the predictable choice.

What is the best airbrush thinner? The one made for your paint. Vallejo's for Vallejo, Air Caste for Citadel Air, X-20A for Tamiya. A universal thinner such as AK's or Gaahleri's is a reasonable choice for mixed collections.

Airbrush thinner and flow improver

A flow improver is the one bottle that fixes tip dry.

We earn a small commission from qualifying purchases at no extra cost to you.

Price the hobby

Everything named on this site carries its price across the shops we track.

Hobby Supermarket

Prices on miniatures, paints, brushes, 3D printing and trading cards, compared across the shops we track in the UK, US, Europe, Canada and Australia.

Deals by email

Send me deals for
Tell us what you play (optional)
What are you into? (optional)
Which games?
Which card games?

As an Amazon Associate we earn from qualifying purchases. We also earn commission as a Wayland Games affiliate and through the eBay Partner Network, Awin and other retailer programmes. See how we make money.

Warhammer, Warhammer 40,000, Age of Sigmar, Citadel and Games Workshop are trademarks of Games Workshop Ltd. Magic: The Gathering is a trademark of Wizards of the Coast, Pokémon of Nintendo, Creatures and GAME FREAK, and Yu-Gi-Oh! of Konami. Other product and brand names belong to their owners. Hobby Supermarket is an independent, unofficial site, not affiliated with, endorsed or sponsored by any of them.

Featured on tools.cafe