A first 3D printer should level its own bed, print PLA without tuning, and be big enough for the things you want to make. For a wargamer that usually means terrain, bases and storage, which is a job for a filament (FDM) printer; for miniatures themselves, a resin printer is the better first buy (see resin vs FDM). These filament printers have automatic levelling on their listings and are sold by the shops we track in most markets:

Entry-level bed-slinger FDM printer
Creality

Direct-drive high-speed FDM filament printer with auto-levelling, upgraded Neptune 4 model
ELEGOO

Enclosed CoreXY high-speed FDM filament printer, current flagship Centauri model
ELEGOO


Enclosed CoreXY FDM printer (multi-colour with the separately sold CFS unit) · 260 x 260 x 260 mm
Creality
Every printer we track is on the 3D printers shelf, priced in your currency.
How we chose
We read each printer's listed specifications (from 3DJake's product pages, and Bambu Lab's own pages for its printers) and the prices at the shops we track in your market. We have not printed on these machines. The picks favour printers that several shops sell, so you can compare prices, and features that remove the usual beginner problems, above all automatic bed levelling, plus a direct-drive extruder.
Beginner 3D printers compared
| Printer | Build volume | Enclosed | Levelling, as listed |
|---|---|---|---|
| Creality Ender 3 V3 SE | 220 x 220 x 250 mm | No | CR-Touch auto-levelling and auto Z-offset |
| ELEGOO Neptune 4 Pro | 225 x 225 x 265 mm | No | Automatic, 121 points |
| ELEGOO Centauri Carbon 2 | 256 x 256 x 256 mm | Yes | Automatic, 121-point mesh |
| QIDI Q2 | 270 x 270 x 256 mm | Yes, heated chamber up to 65 °C | The nozzle itself probes the bed |
| Creality K2 | 260 x 260 x 260 mm | Yes | Automatic |
| Bambu Lab P1S | 256 x 256 x 256 mm | Yes | Automatic (Bambu Lab) |
Figures from 3DJake's listings for the Creality, ELEGOO and QIDI printers, and from Bambu Lab's P1S page. The five 3DJake listings all state a direct-drive extruder, and Bambu Lab describes the P1 series as direct drive on its P1 page.
The cheapest way in: an open-frame printer
An open printer is the lowest-cost start, and for PLA it needs nothing more: Bambu Lab rates PLA as "Ideal" even on its open-frame P1P. The Creality Ender 3 V3 SE is the smallest here, with a 220 mm bed and a CR-Touch sensor that levels it for you. The ELEGOO Neptune 4 Pro is a little larger, at 225 x 225 x 265 mm, and its listing describes a non-contact sensor that maps 121 points across the plate.

Entry-level bed-slinger FDM printer
Creality

Direct-drive high-speed FDM filament printer with auto-levelling, upgraded Neptune 4 model
ELEGOO

Larger-format direct-drive FDM filament printer, upgraded Neptune 4 model
ELEGOO

Current FDM (filament) 3D printer, Anycubic's S1 generation (in scope per the 2026-09-15 ruling)
Anycubic
An enclosed printer: PETG, ABS and quieter prints
An enclosure keeps the heat in, which ABS and ASA need: Bambu Lab rates them "Ideal" on its enclosed P1S and only "Capable" on its open P1P. If you want to try more than PLA and PETG, buy enclosed; our enclosure guide covers when a separate one is worth adding to an open printer.
The ELEGOO Centauri Carbon 2 and Creality K2 both print a 256 mm or larger cube in an enclosed case. The QIDI Q2 adds an actively heated chamber, which its listing says reaches 65 °C.

Enclosed CoreXY high-speed FDM filament printer, current flagship Centauri model
ELEGOO

Enclosed CoreXY high-speed FDM printer sold with the CANVAS multi-colour unit: ELEGOO's flagship for four-colour printing
ELEGOO


Enclosed CoreXY FDM printer (multi-colour with the separately sold CFS unit) · 260 x 260 x 260 mm
Creality


Enclosed CoreXY FDM printer sold with the ACE Pro multi-colour unit (which also dries filament while printing): four-colour printing
Anycubic
The best 3D printer for cheap
The lowest-priced way into 3D printing is an open-frame "bed slinger", where the build plate moves back and forth under the nozzle. It prints PLA and PETG well, which covers terrain, bases and storage. What it gives up against a dearer printer is speed, an enclosure, and usually some build volume. The thing not to give up, even on a budget, is automatic bed levelling, because a badly levelled bed is a common cause of a failed first layer. A direct-drive extruder is also worth having if you will ever print flexible filament such as TPU.
The Creality Ender 3 V3 SE is an entry-level bed slinger, the ELEGOO Neptune 4 is the entry model of its Neptune 4 series, and the older Neptune 3 Pro is a compact open-frame printer. The cards show today's price in your market, so you can compare them directly.

Entry-level bed-slinger FDM printer
Creality

Compact open-frame FDM printer (225 x 225 x 280mm): an inexpensive way into filament printing for terrain and props
ELEGOO

Direct-drive high-speed FDM filament printer, current Neptune entry model
ELEGOO

Direct-drive high-speed FDM filament printer with auto-levelling, upgraded Neptune 4 model
ELEGOO
The printer is not the whole cost. Filament is the running cost, and our 3D print cost calculator works out what a print costs in material from the spool prices the shops in your market charge.
The best 3D printer for home
A printer that lives in a home, rather than a workshop, is better enclosed. The enclosure keeps curious hands and pets away from the hot nozzle and moving parts, keeps the print warm and out of draughts, and contains some of the noise. It also lets you print ABS and ASA later, which Bambu Lab rates "Ideal" only on its enclosed P1S.
Other things that matter at home:
- Footprint: measure the shelf or desk. A printer's outside size is larger than its build volume, and an enclosed one needs space to open its door or lid.
- Ventilation: PLA is the mildest filament to print. For ABS and ASA, print in a room you can ventilate, and check whether the printer has a filter.
- Noise: printers run for hours. Put it where a fan and stepper motors will not keep anyone awake.
The ELEGOO Centauri 2 and QIDI Q2 are enclosed and sold by the shops we track in all five markets; QIDI's Q2C is the Q2's lower-priced, compact sibling.

Enclosed CoreXY FDM filament printer, current Centauri entry model
ELEGOO


Compact enclosed FDM printer: QIDI's lower-priced sibling of the Q2
QIDI Tech

Enclosed CoreXY high-speed FDM filament printer, current flagship Centauri model
ELEGOO


Enclosed CoreXY FDM printer (multi-colour with the separately sold CFS unit) · 260 x 260 x 260 mm
Creality
Multi-colour: a combo or not?
Printers sold as a "Combo" come with a multi-spool unit that switches filament during a print. It is the way to print two or more colours, or to keep several spools loaded. For terrain you will paint, one colour is enough, so a combo is optional for a first printer. If you do want one, our multi-colour 3D printer guide compares the systems.
What to buy with your first printer
- Filament: start with PLA. Our PETG vs PLA guide explains when to step up.
- A spare build plate, if you will print often: see textured vs smooth PEI.
- Dry storage for opened spools: see filament storage.
- Nozzles, later: see nozzle sizes.
Buying a printer as a present? Our 3D printing gift guide covers the extras that go with it.
Questions
What is the best 3D printer for a beginner?
A filament printer with automatic bed levelling that a shop in your market sells, such as the Creality Ender 3 V3 SE or ELEGOO Neptune 4 Pro for an open frame, or the ELEGOO Centauri Carbon 2, QIDI Q2 or Creality K2 for an enclosed one.
Should a beginner buy a resin or filament printer?
For terrain, bases and props, filament. For 28 mm miniatures, resin. Our resin vs FDM guide explains the difference.
Do I need an enclosed 3D printer?
Not for PLA. For ABS and ASA, yes; Bambu Lab rates them ideal only on its enclosed printer.
What is the best cheap 3D printer?
An open-frame filament printer with automatic bed levelling and a direct-drive extruder, such as the Creality Ender 3 V3 SE or an ELEGOO Neptune 4. The cards show the price in your market.
What is the best 3D printer for home use?
An enclosed one. The enclosure keeps hands and pets away from the hot nozzle, holds the heat in and contains some of the noise. The ELEGOO Centauri 2 and QIDI Q2 are enclosed and sold in all five of our markets.
What filament should a beginner use?
PLA. Prusa calls it one of the easiest materials to print, and it needs no enclosure.
We compare listed specifications and the prices at the shops we track; we have not printed on these machines ourselves.
