A painting handle gives you something to hold that is not the model. That sounds minor until you have rubbed the paint off a cloak with your thumb for the third time, or snapped a spear holding a figure by its base edge. Every handle does the same basic job; what separates them is how they grip (a spring clamp, cork, putty or a magnet), which bases they take, and whether they sit still when you put them down. Here are the handles that are easiest to buy in your market, priced at the shops we track.

Spring-clamp painting handle, third-generation Warhammer Colour design
Citadel

Spring-clamp handle for standard round bases
Citadel

Oversized painting handle for large miniatures
Citadel

360-degree rotatable handle with a finger rest, six setting caps and a detachable base
Golden Maple

Ball-joint magnetic miniature holder, supplied with grey putty
Redgrass Games

Painting handle for holding a miniature while you work
AK Interactive
Everything here is on the painting handles and holders shelf, which also carries the clips, stands and helping hands for sub-assemblies. Descriptions below come from each maker's or retailer's own product record.
Four ways to hold a miniature
Spring clamp. Jaws on a spring close on the edge of the base. It is the fastest way to mount and unmount a model, so it suits batch painting a unit, and it is what Citadel's Mk2 and MK3 Warhammer handles use. The limit is the base: a clamp sized for round infantry bases may not take a large oval, a cavalry base or a vehicle.
Cork. The model is pinned, glued or tacked to a cork. It costs very little, it takes any size of model, and you can cut it to shape. It is also the slowest to swap, so cork suits a character you will work on for an evening.
Putty. A blob of mounting putty on a handle's cap holds the model by its base or by a pin. It grips almost anything, including unbased figures and sub-assemblies, and it is how Redgrass's RGG360 is supplied (with grey putty).
Magnet. The model sits on a cap or plate, and the cap docks magnetically on the handle. Mount ten models on ten caps and you can swap between them without touching the paint, which is the point of the systems below.
Spring-clamp handles
The spring-clamp handle is what most painters own first, and the official Warhammer ones are the easiest to find in a shop.
- Warhammer Painting Handle MK3: Games Workshop's current spring-clamp handle, the third generation of the design.
- Citadel Painting Handle Mk2: the previous generation, a spring clamp for standard round bases, still widely stocked.
- Citadel Colour Painting Handle XL: the oversized handle for large miniatures. These are three different products under three different codes, so check the name before you buy.
- AK Interactive Painting Handle and the AK Painting Handle XL for bigger models and sub-assemblies.

Spring-clamp painting handle, third-generation Warhammer Colour design
Citadel

Spring-clamp handle for standard round bases
Citadel

Oversized painting handle for large miniatures
Citadel

Painting handle for holding a miniature while you work
AK Interactive

Larger painting handle for big models and sub-assemblies
AK Interactive
Ergonomic and rotating handles
These are bought for long sessions: a fatter grip, a rest for your fingers, a weighted base so the handle stands up between coats, and a head that turns so you can reach the far side of the model without changing your grip. None of that makes the paint go on better, but it makes three hours at the desk easier on the wrist.
- Golden Maple Ergonomic Painting Handle: a 360-degree rotatable handle with a metal rest for a finger, six setting caps and a detachable base that also works as a stand.
- Golden Maple 360° Sandalwood Painting Handle, in purple-black or yellow: sandalwood on a weighted base, with a magnetic 360-degree setting cap.
- AK Interactive Handle Support: a holder with a removable finger rest, so your painting hand has something to brace on for detail work such as painting eyes.
Golden Maple sell direct, and their handles reach all five of our markets.

360-degree rotatable handle with a finger rest, six setting caps and a detachable base
Golden Maple

Sandalwood handle on a weighted base with a magnetic 360-degree setting cap
Golden Maple

Sandalwood handle on a weighted base with a magnetic 360-degree setting cap
Golden Maple

Miniature holder with a removable finger rest for steady detail work
AK Interactive
The Redgrass RGG360
The Redgrass Games RGG360 Miniature Holder V2 is a magnetic holder on a ball joint, supplied with grey putty. The ball joint lets you tilt the model to any angle and leave it there, and the magnetic caps are the reason people buy it: Redgrass sell extra XL caps, regular caps and metal docking plates, so you can keep a whole unit mounted and swap figures in and out without touching them. Their mounting putty is the refill.

Ball-joint magnetic miniature holder, supplied with grey putty
Redgrass Games

Four extra XL caps for the RGG360 V2 handle, for batch painting
Redgrass Games

Three metal docking plates for the RGG360 V2 painting handle
Redgrass Games

15g mounting putty for holding miniatures on a painting handle
Redgrass Games
Cork holders, the cheap answer
A cork is the oldest painting handle there is, and still a good one. Pin the model through its foot or glue the base to the top, and you have a handle that takes any size of figure.
- Golden Maple Simple Cork Handle, in 30mm and 38mm widths: plain cylinders, sold in all five markets.
- Golden Maple Trapezoidal Cork Handles, sold three to a pack in three versions, soft enough to cut to shape with a hobby knife.
- Green Stuff World Sculpting Cork, a conical cork, with an XL for larger miniatures and a 10cm column that keeps your hand well clear of the model.
- Redgrass Pinning Corks, four to a pack.

Plain 30mm cork holder for mounting a miniature
Golden Maple

Plain 38mm cork holder for mounting a miniature
Golden Maple

Cut-to-fit trapezoidal cork holders, three to a pack
Golden Maple
Conical cork holder, 5.5cm base, for holding a mini while you work
Green Stuff World

Four corks for pinning and holding miniatures while painting
Redgrass Games
Holders for parts and sub-assemblies
Painting a model in pieces (a cloak apart from the body, a rider apart from the mount) is often easier than painting it whole, and the pieces need holding too.
- Citadel Colour Sub-assembly Holder: a clamp for small sub-assemblies while they are painted.
- Citadel Colour Assembly Stand: holds sub-assemblies while glue cures and paint dries.
- Golden Maple Magnetic Alligator Clip Sticks: thirty bendable clip sticks on magnetic bases, with a metal box they stand in.
- Green Stuff World Universal Work Holder on Stand: an adjustable clamp on a weighted stand.
- Citadel Colour Spray Stick: a rotating stick that holds miniatures at arm's length for spray priming.

Clamp for holding small sub-assemblies while painting
Citadel

Stand for holding sub-assemblies during assembly and painting
Citadel

Thirty bendable magnetic clip sticks with a steel organiser box
Golden Maple

Adjustable clamp holder on a weighted stand
Green Stuff World

Rotating stick that holds miniatures at arm's length for spraying
Citadel
Which painting handle to buy
- Painting a unit of infantry: a spring-clamp handle. It takes the model on and off in a second, and the official Warhammer handles fit standard round bases.
- Long sessions on one model: an ergonomic or rotating handle with a weighted base, and, if the detail is what you struggle to see, a magnifier for miniature painting.
- Batch painting with lots of models in progress: a magnetic cap system like the RGG360, with extra caps.
- Large models, vehicles and oddly shaped bases: an XL handle, a cork, or putty, since a standard clamp will not reach.
- On a tight budget: a cork and some mounting putty. It does the job as well as anything here.
Tips
- Hold the handle, not the model. It sounds obvious; it is the habit that saves the paint job.
- Check the base size before buying a clamp handle. A handle that will not take your cavalry is one you keep putting down.
- Base the model before you paint it if you use a clamp handle, so the clamp grips the base rather than the feet. Basing miniatures covers how.
- Keep a second handle loaded so you always have something to paint while a coat dries.
- A good light matters as much as a good grip. The painting lamp guide covers what to look for.
Compare painting handles
Every handle, cork, holder and clip we track, priced side by side at the shops that list it in your market.
We earn a small commission from qualifying purchases at no extra cost to you.
