Two kinds of magnifier suit a painting desk. A head visor (the optivisor, magnifier headset or magnivisor) sits on your head and flips down over your eyes, so the magnification follows wherever you look. A magnifying lamp is a lens on an arm over the desk, with light built in. Visors suit painters who want both hands free and a lens that moves with them; lamps suit painters who want to look through glass without wearing anything. Here are the visors and magnifiers on sale in your market:

Head-worn magnifying visor with four lenses
Vallejo

Spring-arm magnifying lamp, 12.7cm glass lens, 1.75x
Daylight

Clamp magnifier, 9cm acrylic lens, 2.25x, 68cm reach
Daylight

clamp-on swing-arm LED magnifying lamp · SAM170A · 3 dioptre (1.75x) · 56 · 700 lm · 5016086259909 · 010811539
Clarke

Bench stand with a 15x10cm 2x lens, six LEDs and tool holders
Tamiya
Head magnifier or magnifying lamp? Optivisor vs lamp
| Head visor | Magnifying lamp | |
|---|---|---|
| Hands | Free, and so is the whole desk | Free, but it takes desk space or a clamp |
| Magnification | Usually a set of swappable lenses, often stronger | Typically one lens at one strength, sometimes with an inset |
| Light | Some have a built-in LED; many have none | Built in on most |
| Comfort | Sits on the head, so weight and fit matter | Nothing to wear |
| Glasses | Many visors are made to wear over glasses; check | No issue |
| Moving about | Goes where you look | The lens stays where the arm puts it |
Choose a visor if you paint with the model in your hand on a handle, move around the desk, wear glasses and want to flip the magnification up and down. Choose a lamp if you paint in long sessions with the model on the desk, want the lens and the light together, and do not like anything on your head.
How strong should it be?
Strength is quoted in dioptres (D) or as a magnification (x). They convert: magnification is the dioptres divided by four, plus one. So 3D is 1.75x, 5D is 2.25x and 8D is 3x.
Stronger is not better. A stronger lens has a shorter focal length, which pulls your face down to the model and shrinks the area in focus. For painting a miniature, many painters work at about 1.75x to 2.5x: enough for an eye, with room for a brush.
Visors make this easy because the lenses swap. Excel's Deluxe Headband Magnivisor lists four levels (1.8x, 2.3x, 3.7x and 4.8x), and Green Stuff World's head-worn magnifier lists 1.2x, 1.8x, 2.5x and 3.5x. Start on the lower lenses and keep the higher ones for checking a join or cleaning a mould line.

Head-worn magnifier, four lenses with an LED
Green Stuff World

Head-worn magnifying visor with four lenses
Vallejo

In the UK the shops we track list the Vallejo headband magnifier, Green Stuff World's head-worn magnifier and the Iwata LED magnifier, as well as the whole Daylight and Clarke lamp range below.
Magnifying lamps
A magnifying lamp puts the lens and the light on one arm. The two figures to check are the lens size and the reach. A big lens lets you move your head without losing the image, and a long arm lets you place the lens without moving the base. The makers' own figures for the lamps we track:
| Lamp | Lens | Magnification | Other stated details |
|---|---|---|---|
| Daylight MAG Lamp S | 12.7 cm glass | 1.75x | 2 brightness levels, 110 cm reach |
| Daylight MAG Lamp XL | 17.7 cm glass | 1.75x | 770 lumens, 108 cm reach |
| Daylight Omega 3.5 | 9 cm acrylic | 2.25x | clamp, 68 cm reach, carry bag |
| Daylight Halo Go 2 | 9 cm | 2.25x with a 4x inset | rechargeable, folding |
| Clarke SAM170A | not stated | 1.75x | clamp-on, 56 LEDs, 700 lm |
| Clarke SAM127A | not stated | 1.75x | clamp-on, 48 LEDs, 500 lm |

Spring-arm magnifying lamp, 17.7cm glass lens, 1.75x
Daylight

Rechargeable folding magnifier, 9cm 2.25x lens + 4.0x inset
Daylight

Professional magnifier, 7in optical glass lens plus 8D/12D swing lenses
Daylight

clamp-on swing-arm LED magnifying lamp · SAM127A · 3 dioptre (1.75x) · 48 · 500 lm · 5016086259893 · 010811537
Clarke

Magnifying lens on an illuminated desk arm
Green Stuff World

Foldable LED-lit bench magnifier on a stand
Vallejo
The lamp guide has more on magnifying lamps and what they do to a painting desk, and the complete shelf, priced side by side, is at magnifiers and visors.
Hands-free holders
Magnification and a handle together: a holder keeps a model steady so you can use both hands, and many helping-hands stations add a magnifying lens of their own. The best painting handle guide compares the handles.

helping-hands stand with crocodile clips and magnifier · CHT201 · 5016086122128 · 040212060
Clarke

Thirty bendable magnetic clip sticks with a steel organiser box
Golden Maple

Oversized painting handle for large miniatures
Citadel

360-degree rotatable handle with a finger rest, six setting caps and a detachable base
Golden Maple

Clamp for holding small sub-assemblies while painting
Citadel

Sandalwood handle on a weighted base with a magnetic 360-degree setting cap
Golden Maple
Try light first
Many painters who think they need a magnifier need more light, not more lens. Brighter light helps you see detail without extra magnification. A good lamp is the cheaper test, and the best lamp for miniature painting guide covers it. Where the magnifier goes on the desk is in how to set up a miniature painting station.
What to buy
- You want both hands free and wear glasses: a visor with swappable lenses, and check the product page for whether it fits over glasses.
- You paint on a desk for hours: a 1.75x lamp with the largest lens you can afford.
- You paint away from a desk: a rechargeable or folding magnifier.
- You only need to check a join now and then: a small pocket magnifier is enough.
Tips
- Do not over-magnify. The stronger the lens, the closer your face has to be to the model.
- Rest your eyes. Look away from the model every few minutes.
- Check the lens material. Glass resists scratches; acrylic is lighter.
Questions
What is the best magnifier for painting miniatures?
A head visor with swappable lenses if you want both hands free, or a 1.75x magnifying lamp with a large lens if you paint on a desk. About 1.75x to 2.5x is the usual working strength.
Head magnifier or magnifying lamp for miniatures?
A visor moves with your head and leaves the desk clear. A lamp gives glass and light together with nothing to wear. Choose by how you paint.
How do dioptres convert to magnification?
Magnification is the dioptres divided by four, plus one. So 3D is 1.75x, 5D is 2.25x and 8D is 3x.
Do I need a magnifier to paint miniatures?
Not always. Better light often fixes the problem first. If you still cannot see the detail, add a magnifier.
Can I wear a head magnifier with glasses?
Many visors are made to wear over glasses, but fit varies, so check the product page before you buy.
We compare what the makers and the shops we track publish, and their prices; we have not used these magnifiers ourselves.
