Hobby SupermarketHobbySupermarket

Gunpla Tools: What You Actually Need

Nippers first, then a knife and something to sand with

A High Grade Gunpla kit needs one tool: a pair of nippers to cut the parts from the runner. Everything else on this page makes the finished kit look cleaner, and you can add it kit by kit. (An Entry Grade needs nothing at all: Bandai design its parts to come off the runner by hand, as our grades guide explains.)

Start with nippers. These are the ones the shops we compare sell in your market:

Bandai Spirits Entry Nipper (White)

Bandai

  • free UK delivery over £20, 2–3 working days · 14-day returns
  • free UK delivery over £60, 2–4 days · 14-day returns
  • postage per seller
Army Painter Precision Side Cutter

Precision side cutter for close sprue trimming

Army Painter

  • free UK delivery over £75, £3.99 below that · dispatched within 1 working day
  • postage per seller
  • postage per seller
Citadel Tools: Super Fine Detail Cutters

Fine sprue cutters for plastic kits

Citadel

  • postage per seller
  • postage per seller
  • postage per seller
Redgrass Games RGG Precision Nippers

Single-blade precision nippers for plastic sprues, max 3 mm, not for metal

Redgrass Games

  • free UK delivery over £40, from £3.33 below that · 30-day returns
Monument Hobbies MonumenTOOLS Flush Cut Clippers

Flush-cut clippers for removing parts from sprue

Monument Hobbies

  • free UK delivery over £20, 2–3 working days · 14-day returns
  • postage per seller
  • postage per seller
Green Stuff World Ultra Flat Cutting Nipper

Ultra-flush nipper for a near-invisible sprue cut

Green Stuff World

  • postage by parcel weight and destination, shown at checkout; no free-shipping threshold · 7-day returns
  • free UK delivery over £20, 2–3 working days · 14-day returns
  • postage per seller

Every cutter we price is on our cutting and prep shelf.

The short list

ToolDo you need it?What it does
NippersYes, for anything above Entry GradeCuts parts off the runner
Hobby knifeStrongly recommendedShaves the leftover nub flush
Sanding sticks or filesRecommendedSmooths the white mark the cut leaves
Panel linerOptional, but the biggest visual changeDarkens the engraved lines
Top coatOptionalSeals stickers and lines, takes the shine off
TweezersOptionalPlaces small stickers and decals
Cutting matOptionalProtects the table from the knife

Nippers

Gunpla nippers are small side cutters with thin jaws, made for soft plastic runners. Bandai sell their own as the Entry Nipper and the Build Up Nipper, and most hobby brands make a pair. What separates a good pair is how flat a face it leaves on the part: a single-blade (flush) nipper cuts one side flat against the part, where a double-blade pair squeezes the plastic and leaves a pale, stressed stub.

Our sprue cutter guide goes through single-blade against double-blade, what GodHand nippers do, and how to keep a fine blade from chipping.

Cut twice. Cut the part off a few millimetres away from it first, then trim the leftover nub close to the part with a second cut. Cutting tight against the part on the first go is what leaves stress marks.

Bandai Spirits Build Up Nipper

Bandai

  • postage per seller
  • free UK delivery over £20, 2–3 working days · 14-day returns
  • postage per seller
Redgrass Games Sprue Cutters

Stainless-steel sprue cutters for plastic and resin, max 3 mm, with protective cap

Redgrass Games

  • free UK delivery over £40, from £3.33 below that · 30-day returns
  • postage per seller

A hobby knife

A sharp knife takes off the last sliver of nub that the nippers leave, and scrapes away any mould line. Shave towards the part's surface in light strokes rather than digging in, and change the blade as soon as it drags. Our hobby knife guide compares the knives.

Army Painter Hobby Knife

Hobby knife with a moulded grip

Army Painter

  • free UK delivery over £20, 2–3 working days · 14-day returns
  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
Citadel Tools: Knife

Citadel hobby knife

Citadel

  • free UK delivery over £20, 2–3 working days · 14-day returns
  • £4.99 UK delivery, 1–2 working days, free over £65 · 60-day returns
  • £4 UK delivery per order, tracked (Royal Mail or InPost) · dispatched in 2–3 working days · 30-day returns
Jakar Hobby Knife with 6 Assorted Blades

Screw-collet hobby knife supplied with 6 different blade shapes (7344-B, 7360-B, 7361-B, 7362-B, 7363-B, 7364-B)

Jakar

  • free UK delivery over £50, from £3 below that · 30-day returns
Gale Force Nine Precision Micro Knife

Fine micro knife for detail cutting

Gale Force Nine

  • free UK delivery over £20, 2–3 working days · 14-day returns

Sanding: the white marks

Where a gate is cut, coloured Gunpla plastic often goes white. Sanding the spot smooth, working up from a coarser grit to a finer one, removes most of the mark, and a matt top coat hides what is left. Sanding sticks and foam pads are easier to keep flat on a part than loose paper.

Citadel File Set

Set of Citadel modelling files

Citadel

  • free UK delivery over £75, £3.99 below that · dispatched within 1 working day
  • free UK delivery over £20, 2–3 working days · 14-day returns
Gunprimer Sand Loop Flat Starter Kit

Starter set of the four Sand Loop Flat grits

Gunprimer

  • free UK delivery over £20, 2–3 working days · 14-day returns
  • postage per seller
Tamiya Sanding Sponge Sheet 400

Sanding sponge sheet, 400 grit

Tamiya

  • free UK delivery over £20, 2–3 working days · 14-day returns
  • £4.99 UK delivery, 1–2 working days, free over £65 · 60-day returns
  • postage per seller
Tamiya Sanding Sponge Sheet 600

Sanding sponge sheet, 600 grit

Tamiya

  • free UK delivery over £20, 2–3 working days · 14-day returns
  • postage per seller
  • postage per seller
AK Interactive Sanding Stick Set

Set of sanding sticks in assorted grades

AK Interactive

  • £4.99 UK delivery, 1–2 working days, free over £65 · 60-day returns
  • postage per seller
  • postage per seller

Gunprimer also sell a dedicated gate remover, the Raser, as a starter kit with its abrasives. It is a tool for builders who already do a lot of kits.

Gunprimer Raser Gate Remover Starter Kit

Gate-removal tool kit with its abrasives

Gunprimer

  • free UK delivery over £20, 2–3 working days · 14-day returns

Panel lining and top coat

These two finishing steps make more difference to a straight build than any other tool. Panel lining runs a dark wash into the engraved lines; a top coat seals it and takes the plastic shine off. Both have their own guide: how to panel line Gunpla, and top coat it, with every panel liner and varnish we price. To paint the kit itself, with Gundam Markers, acrylic or lacquer, see the best paint for Gunpla.

from was £3.76, now £3.58 with our link· compare 2 shops· priced 18 NovExclusive: 5% off using our link only
Light Grey

AK Interactive

from £4.68· compare 3 shops· priced 5 Jul
Army Painter Anti-Shine Matt Varnish

Matt anti-shine topcoat, 400ml aerosol

Army Painter

  • £4.99 UK delivery, 1–2 working days, free over £65 · 60-day returns
  • postage per seller
  • postage per seller
Colour Forge Matt Varnish Spray (500ml)

Matt clear coat sprayed over a finished paint scheme to protect it and kill shine · 500ml aerosol · Matt · United Kingdom · TCF-SPR-004 · 5060843100959

Colour Forge

  • postage per seller
  • postage per seller

Tweezers and a cutting mat

Tweezers help with small stickers and water-slide decals, and a self-healing mat stops the knife marking the table. Neither is essential for a first kit.

The Army Painter Tweezers Set

Set of modelling tweezers

Army Painter

  • £5 UK delivery per order (flat rate) · 30-day returns
  • postage per seller
  • postage per seller
The Army Painter Self-healing Cutting Mat

Self-healing cutting mat

Army Painter

  • £5 UK delivery per order (flat rate) · 30-day returns
  • free UK delivery over £75, £3.99 below that · dispatched within 1 working day
  • £4.99 UK delivery, 1–2 working days, free over £65 · 60-day returns

What you do not need yet

  • Glue. Gunpla snaps together. Glue is only for modifying parts.
  • Paint. The plastic is moulded in colour, and on most kits the stickers do the rest.
  • The most expensive nippers. A single-blade pair is what a first kit needs; the dearest pairs can wait.

Tips

  • Buy nippers before anything else.
  • Cut twice: once away from the part, once close to it.
  • Sand the white marks, then top coat. The two together hide gate marks best.
  • Keep fine nippers for plastic. Metal and thick runners chip a thin blade.

Shop Gunpla tools

Nippers, files and finishing tools, compared across every shop we track.

We earn a small commission from qualifying purchases at no extra cost to you.

Price the hobby

Everything named on this site carries its price across the shops we track.

Hobby Supermarket

Prices on miniatures, paints, brushes, 3D printing and trading cards, compared across the shops we track in the UK, US, Europe, Canada and Australia.

Deals by email

Send me deals for
Tell us what you play (optional)
What are you into? (optional)
Which games?
Which card games?

As an Amazon Associate we earn from qualifying purchases. We also earn commission as a Wayland Games affiliate and through the eBay Partner Network, Awin and other retailer programmes. See how we make money.

Warhammer, Warhammer 40,000, Age of Sigmar, Citadel and Games Workshop are trademarks of Games Workshop Ltd. Magic: The Gathering is a trademark of Wizards of the Coast, Pokémon of Nintendo, Creatures and GAME FREAK, and Yu-Gi-Oh! of Konami. Other product and brand names belong to their owners. Hobby Supermarket is an independent, unofficial site, not affiliated with, endorsed or sponsored by any of them.

Featured on tools.cafe