Hobby SupermarketHobbySupermarket

How to 3D Print Miniatures, Step by Step

From a file to a primed model, and everything you need to buy on the way

To 3D print miniatures at home you need four things: a resin printer, a bottle of resin, a way to wash the prints (isopropyl alcohol, or water for water-washable resin) and a way to cure them under UV light. A filament printer can make terrain and bases, but for 28 mm infantry and characters resin is the machine to use. These are a starting set, all sold by the shops we track in most markets:

ELEGOO Mars 5 Ultra Resin 3D Printer

9K, 7-inch monochrome LCD resin printer, the upgraded Mars 5 model

ELEGOO

  • postage per seller
  • postage per seller
  • postage per seller
Anycubic Photon Mono 4

Entry-level current-generation mono-LCD resin 3D printer

Anycubic

  • postage per seller
ELEGOO 8K Water-Washable Resin V2.0 1kg, Space Grey

Water-washable UV printer resin tuned for 8K-display printers, second-generation formula · 1000g

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
  • postage per seller
ELEGOO Mercury Plus V3.0 Wash & Cure Station

Combined UV curing and IPA/water washing station for resin prints, current flagship model

ELEGOO

  • postage per seller
  • postage per seller
  • postage per seller
Anycubic Wash & Cure 3

Combined ultrasonic wash and UV cure station for resin prints, the entry model in Anycubic's current line

Anycubic

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
  • postage per seller
  • postage per seller

The printers, resin and stations are on the 3D printers, resin and UV curing shelves.

What you need to 3D print miniatures

ItemWhat it is forOur guide
Resin printerPrints the model, layer by layer, from liquid resinBest resin 3D printer for miniatures
ResinThe material; ABS-like suits gaming modelsBest resin for miniatures
Wash and cure stationCleans off uncured resin, then hardens the print under UVCuring resin prints
Release filmThe film in the resin tank wears out and is replacedFilm and maintenance shelf
Gloves, paper towels, a scraperLiquid resin is a chemical; Phrozen says standard resin needs gloves and protective equipment
Primer and paintThe same as for any plastic miniatureSpray primer guide

Step 1: choose a resin printer

The number that decides detail is the XY resolution, the size of one pixel on the printer's screen. The small printers (6.6 to 7.1-inch) in our printer guide state between 17 and 35 µm; the 10-inch ones fit more models per print. Start with a 7-inch printer sold in your market, unless you already know you will print whole armies. Elegoo Mars vs Saturn counts how many models each size fits on one plate.

Step 2: get the files

Miniatures are sold as STL files by their sculptors, often in monthly sets or by the model. Print only files you have the right to print: a file shared without its sculptor's permission is not one of them. We sell no models and host no files.

Step 3: slice and support

A slicer turns the model into the layers the printer exposes. Each printer's listing names the slicers it works with (CHITUBOX for the ELEGOO Saturn 4 Ultra 16K, for example, and VoxelDance Tango or CHITUBOX for the Phrozen Sonic Mini 8K S). Many sculptors sell files already supported, which saves the hardest part for a beginner: placing supports so the print does not fail and the marks fall where you will not see them.

Step 4: print

Fill the tank with resin, level the plate if your printer needs it, and start the print. Some printers (the ELEGOO Saturn 4 Ultra 16K, the Anycubic Photon P1) list a heated or temperature-controlled tank (20 to 40 °C on the P1, by its listing). The release film at the bottom of the tank wears with use; replace it when it clouds or tears.

ELEGOO FEP Film for Mars 4/5/5 Ultra (5 pack)

Replacement FEP release film shared across the Mars 4, Mars 5 and Mars 5 Ultra vats · Pack of 5 sheets

ELEGOO

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
ELEGOO PFA Film for Saturn 2/8K/3/4/4 Ultra/4 Ultra 16K (5 Pcs)

Replacement PFA release film for the Saturn-series resin vat · Pack of 5 sheets · Saturn 2, Saturn 8K, Saturn 3/3 Ultra, Saturn 4/4 Ultra/4 Ultra 16K

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
Phrozen ACF Film 210 x 290 mm (3 pack)

ACF release film for resin printer vats, three sheets · 3 x 210 x 290 mm

Phrozen

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns

Step 5: wash

A fresh print is coated in liquid resin. Standard and ABS-like resins are washed in isopropyl alcohol (IPA); water-washable resin in water. A wash station agitates the liquid for you. Phrozen's rule for water-washable resin: "Don't pour uncured water directly down the drain". Leave it in the sun so the resin cures, then filter it out.

Step 6: dry, then cure

Let the print dry fully, then cure it under UV light so it reaches full hardness. Formlabs' instruction for its own station is to "always wash and fully dry parts before post-curing". Our curing guide compares stations that do both jobs with stations that do one.

ELEGOO Mercury Plus V3.0 Wash & Cure Station

Combined UV curing and IPA/water washing station for resin prints, current flagship model

ELEGOO

  • postage per seller
  • postage per seller
  • postage per seller
Anycubic Wash & Cure 3

Combined ultrasonic wash and UV cure station for resin prints, the entry model in Anycubic's current line

Anycubic

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
  • postage per seller
  • postage per seller
Creality UW-03 Washing/Curing Machine

Resin wash and cure machine

Creality

  • free UK delivery over £99 · dispatched within 3 working days · 14-day returns
Phrozen Wash & Cure Kit

Combined wash and UV cure station for resin prints

Phrozen

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns

Step 7: remove supports, prime and paint

Clip the supports, sand any marks, and wash the model with soap and water before priming, as you would a resin kit. From here it is an ordinary miniature: prime it, paint it and base it, with the print-specific steps in how to paint 3D prints. Our how to start painting and basing guides take over.

Printing terrain too?

Resin is slow and costly for big pieces. Most people who print an army also own a filament printer for buildings, scatter and bases. Our resin vs FDM guide explains the split, and PETG vs PLA covers the filament.

Questions

Can you 3D print miniatures at home?

Yes. You need a resin printer, resin, a way to wash the prints and a way to cure them under UV light. A wash and cure station does the last two in one machine.

What is the best 3D printer for D&D miniatures?

A resin printer, for the detail on faces and hands. A 7-inch model suits a few heroes at a time; a 10-inch printer suits large monsters and batches.

Is resin or filament better for miniatures?

Resin, for detail at 28 mm. Filament is cheaper per model and better for terrain and big pieces.

Do I need a wash and cure station?

No, but it is the easiest way. A tub of isopropyl alcohol and a UV lamp or curing chamber do the same jobs by hand.

We compare makers' figures and the prices at the shops we track; we have not printed these models ourselves.

Price the hobby

Everything named on this site carries its price across the shops we track.

Hobby Supermarket

Prices on miniatures, paints, brushes, 3D printing and trading cards, compared across the shops we track in the UK, US, Europe, Canada and Australia.

Deals by email

Send me deals for
Tell us what you play (optional)
What are you into? (optional)
Which games?
Which card games?

As an Amazon Associate we earn from qualifying purchases. We also earn commission as a Wayland Games affiliate and through the eBay Partner Network, Awin and other retailer programmes. See how we make money.

Warhammer, Warhammer 40,000, Age of Sigmar, Citadel and Games Workshop are trademarks of Games Workshop Ltd. Magic: The Gathering is a trademark of Wizards of the Coast, Pokémon of Nintendo, Creatures and GAME FREAK, and Yu-Gi-Oh! of Konami. Other product and brand names belong to their owners. Hobby Supermarket is an independent, unofficial site, not affiliated with, endorsed or sponsored by any of them.

Featured on tools.cafe