Hobby SupermarketHobbySupermarket

Textured vs Smooth PEI Build Plates

Smooth for PLA and a glossy underside, textured for PETG and TPU, and why the plate has to match your printer

A textured PEI plate is the safest all-rounder: PETG and TPU release from it without damage, and prints pop off once it cools. A smooth PEI plate gives a glossy underside and grips PLA well, but PETG and TPU can stick to it so hard they damage the sheet. Build plates are sized to one printer, so match the model name first. These plates are sold by the shops we track in the most markets:

QIDI Tech PEI Build Plate for X-Max 3

Double-sided gold textured PEI spring-steel build plate · X-Max 3

QIDI Tech

  • dispatched in 1–5 working days
QIDI Tech PEI Build Plate for Plus5

Dual-sided textured PEI build plate · Plus5

QIDI Tech

  • dispatched in 1–5 working days

Every plate we track is on the FDM build plates shelf, filterable by surface and by the printer it fits.

Textured vs smooth PEI at a glance

Textured PEISmooth PEI
SurfaceA powder-coated PEI layer on spring steelA PEI sticker on spring steel
Underside of the printTextured finishSmooth, glossy finish
PLAPrusa says small PLA prints may need a brimPrusa: "ideal for printing PLA"
PETGPrusa: "ideal for extensive printing of PETG"Can bond too hard; Prusa advises a thin glue stick layer
TPUPrusa: ideal, and no glue stick neededCan bond too hard and damage the sheet
ABS, ASA, nylon, PCPrusa: needs glue stick as a separation layer (ASA, ABS, nylon, PC Blend)Prusa: may need glue stick (ASA, ABS, PC Blend)
CleaningIPA when cold; never acetoneIPA when cold; acetone occasionally

All from Prusa's own pages for its textured and smooth sheets. Other makers' plates use the same two surfaces; follow their care notes where they differ.

Smooth PEI: a glossy base for PLA

Prusa describes its smooth sheet as "ideal for printing PLA, HIPS, ABS/ASA, composite materials (metal/wood)" and "compatible with most types of filament". The underside of the print comes off flat and shiny, which suits a terrain tile or a display base whose bottom shows.

Its weakness is the filaments that grip too well. Prusa warns that "some filaments, like TPU and PETG, will adhere too much and can damage the sheet when removed", and that PETG, ASA, ABS and PC Blend "may need a protective separation layer, like gluestick, applied thinly before printing". Prusa's PETG page goes further: "Do not print on the smooth PEI sheet as the adhesion may be too strong!" Choosing between the two filaments in the first place? See PETG vs PLA.

QIDI Tech Dual-Sided Smooth Plate for Q2

Smooth PEI build surface for a glossy first layer · Q2

QIDI Tech

  • dispatched in 1–5 working days
QIDI Tech Smooth Plate for Q1 Pro

Smooth PEI build plate · Q1 Pro

QIDI Tech

  • dispatched in 1–5 working days

Textured PEI: the all-rounder for PETG and TPU

Prusa's textured sheet is powder-coated with PEI and "ideal for extensive printing of PETG, CPE, TPEE/TPU", with "no need for glue-stick with flexible filaments". It also says "prints automatically detach after the sheet cools down". The bottom of each print carries the texture, which most terrain hides anyway.

Prusa lists a few cautions: ASA, ABS, nylon and PC Blend need glue stick as a separation layer, small PLA prints may need a brim, and the coating is "not scratch-resistant", so use a plastic scraper.

QIDI Tech PEI Build Plate for X-Max 3

Double-sided gold textured PEI spring-steel build plate · X-Max 3

QIDI Tech

  • dispatched in 1–5 working days
QIDI Tech PEI Build Plate for Plus5

Dual-sided textured PEI build plate · Plus5

QIDI Tech

  • dispatched in 1–5 working days

Dual-sided plates

Some plates carry a different surface on each side, so you flip the sheet to suit the filament. ELEGOO's dual-sided plates for the Neptune 4 and Centauri, and Bambu Lab's Dual Texture plate, are examples. Check the product listing for which surfaces it carries.

Cool plates for PLA

A third kind of plate, sold as a cool or cold plate, is made for printing PLA at a low bed temperature. Bambu Lab's Cool Plate SuperTack and ELEGOO's Cold Plates are examples, and they are on the build plates shelf.

Cleaning a PEI plate

Prusa says grease greatly reduces adhesion, so keep fingers off the print area. Its instruction for both sheets is to clean them with "~90% IPA or denatured alcohol" when cold, and not to use anything made for skin. Acetone is allowed on the smooth sheet occasionally (Prusa says 1 to 2 times a month), but "never clean the sheet with acetone" on the textured one, because it damages the surface.

Match the plate to your printer

A build plate is sized to one printer bed, and many are magnetic sheets that sit on that printer's own base. That is why ELEGOO sells separate plates for the Neptune 4 Pro, 4 Plus and 4 Max. On the build plates shelf, the "fits my printer" filter shows only the plates for your machine.

Questions

Is textured or smooth PEI better?

Textured is the safer all-rounder, because PETG and TPU release from it without damage. Smooth gives a glossier underside and grips PLA well, but PETG and TPU can bond to it too hard.

Can I print PETG on smooth PEI?

Prusa advises against it, or a thin layer of glue stick as a separation layer first, because PETG can stick too well and damage the sheet.

How do I clean a PEI build plate?

Prusa says to use about 90% isopropyl alcohol or denatured alcohol on a cold sheet. Never use acetone on a textured sheet.

Do build plates fit any printer?

No. Each plate is sized for one printer bed, so match the model name on the listing to your printer.

We compare what the makers publish and the prices at the shops we track; we have not printed on these plates ourselves.

Price the hobby

Everything named on this site carries its price across the shops we track.

Hobby Supermarket

Prices on miniatures, paints, brushes, 3D printing and trading cards, compared across the shops we track in the UK, US, Europe, Canada and Australia.

Deals by email

Send me deals for
Tell us what you play (optional)
What are you into? (optional)
Which games?
Which card games?

As an Amazon Associate we earn from qualifying purchases. We also earn commission as a Wayland Games affiliate and through the eBay Partner Network, Awin and other retailer programmes. See how we make money.

Warhammer, Warhammer 40,000, Age of Sigmar, Citadel and Games Workshop are trademarks of Games Workshop Ltd. Magic: The Gathering is a trademark of Wizards of the Coast, Pokémon of Nintendo, Creatures and GAME FREAK, and Yu-Gi-Oh! of Konami. Other product and brand names belong to their owners. Hobby Supermarket is an independent, unofficial site, not affiliated with, endorsed or sponsored by any of them.

Featured on tools.cafe