Filament and resin
3D Print Cost Calculator
What a 3D print costs in material, electricity and failed prints, with the material priced from the in-stock spools and resin at the shops we track in your country.
Cheapest PLA per kg at the shops we track in Canada
Cost of this print
C$1.39
C$0.023 per gram of print · material C$0.020 per gram
- Material (60 g of PLA)
- C$1.20
- Electricity (0.48 kWh)
- C$0.062
- Failed prints (10%)
- C$0.13
Material: 60 g ÷ 1000 g × C$19.99 = C$1.20
Electricity: 120 W × 4 h = 0.48 kWh × C$0.13 = C$0.062
Failures: 10% of C$1.26 = C$0.13
Cheapest PLA per kg in Canada
C$16.00 for 1000 g · C$16.00 per kg
The print
The spool
Filled in with the median price per kg of the 128 in-stock PLA listings we track in Canada; the cheapest is C$16.00 per kg. Change it to what you paid.
Electricity
A round household rate for Canada and a typical average draw. The rate on your bill and a plug-in power meter give the real figures.
Selling prints?
Optional: your time and a markup, to turn the cost into a price.
How the cost of a 3D print is worked out
A print costs its material, the electricity the printer draws while it runs, and a share of the prints that fail. Material is the weight your slicer reports divided by the weight of the spool or bottle, times what you paid for it. Electricity is the printer's average power in kilowatts times the hours the print takes, times your price per kWh. A failure rate adds its share of both, because a failed print burns material and power and leaves nothing to show. If you sell prints, your time and a markup go on top.
The difference here is the material price. Instead of a figure someone typed in once, the spool or bottle price starts at the median price per kg of the in-stock filament we track in Canada, in Canadian dollars, from the same shop offers the 3D printing shelves list. The median rather than the cheapest, so one clearance spool does not set the price of every print; the cheapest per kg are listed at the top of the page to buy. A pack of several spools, a sample and a trade drum of more than 5 kg do not count towards it.
How much does a 3D print cost in Canada?
Typical costs for miniature and terrain prints: round figures for prints painters often make, priced at the medians below, with no failures, labour or markup. The weights are illustrations of the sum, not measurements of any model: your slicer gives the real one.
| Uses | Material | Electricity | Total | |
|---|---|---|---|---|
| A 28 mm infantry model with its supports | 6 ml Standard resin, 3 h | C$0.15 | C$0.020 | C$0.17 |
| A large monster or tank | 120 ml Standard resin, 9 h | C$3.03 | C$0.059 | C$3.09 |
| A ruined wall section of 28 mm terrain | 60 g PLA, 4 h | C$1.20 | C$0.062 | C$1.26 |
| A two-storey ruin or building | 400 g PLA, 22 h | C$8.00 | C$0.34 | C$8.34 |
| Ten 32 mm bases | 25 g PLA, 2 h | C$0.50 | C$0.031 | C$0.53 |
| A carry-case tray insert in PETG | 250 g PETG / PCTG, 12 h | C$4.75 | C$0.19 | C$4.93 |
A resin printer cures a whole layer at once, so a plate of ten infantry models takes about as long as one: the electricity per model falls the more you fit on the plate.
Filament and resin prices per kg in Canada
The defaults the calculator uses, from the in-stock listings we track in Canada today. Where a market has few listings of a material we say so: the median of three spools is a rough guide, not a market price.
| Material | Median per kg | Cheapest per kg | In-stock listings |
|---|---|---|---|
| PLA | C$19.99 | C$16.00 | 128 |
| PLA+ / Pro | C$20.99 | C$17.00 | 64 |
| Matte PLA | C$23.99 | C$18.00 | 36 |
| Silk PLA | C$23.99 | C$17.99 | 34 |
| Specialty PLA | C$26.00 | C$24.00 | 43 |
| PETG / PCTG | C$18.99 | C$16.00 | 104 |
| ABS / ASA | C$22.99 | C$18.00 | 40 |
| TPU | C$31.99 | C$24.99 | 21 |
| Carbon / glass fibre | C$30.99 | C$25.99 | 34 |
| Nylon, PC & engineering | C$42.99 | C$34.99 | 5 |
| Standard resin | C$22.99 | C$18.50 | 11 |
| ABS-like resin | C$24.00 | C$24.00 | 5 |
| Water-washable resin | C$26.74 | C$25.99 | 8 |
| High-detail (8K+) resin | C$23.99 | C$19.99 | 6 |
| Plant-based resin | None in stock | 0 | |
| Tough & engineering resin | C$39.99 | C$39.99 | 1 (thin) |
| Flexible resin | None in stock | 0 |
3D printing costs, answered
How much does a 3D print cost?
For a hobby print, the material is usually a small part of the cost of the hobby and often the smallest part of what a print shop charges. At the median price of a 1 kg PLA spool we track in Canada (C$19.99 per kg), a 60 g terrain piece uses about C$1.20 of filament, and four hours on a 120 W printer at C$0.13 per kWh adds about C$0.062 of electricity. A 28 mm infantry model using about 6 ml of resin with its supports comes to about C$0.15 in resin. A print shop or a seller charges more because their price also covers machine time, failed prints, their labour and a profit. The calculator above adds each of those if you are pricing prints to sell.
How do you calculate the cost of a 3D print?
Material cost is the weight of the print divided by the weight of the spool or bottle, times what the spool or bottle cost. Electricity is the printer's average power in kilowatts, times the hours the print takes, times your price per kWh. Add a share for failed prints (a 10% failure rate adds 10% to material and electricity), then any labour, then any markup. Your slicer reports the weight in grams (FDM) or the volume in ml (resin) and the print time.
How much does 3D printer filament cost?
In Canada, the median price of the in-stock 1 kg-equivalent PLA we track is C$19.99 per kg, and PETG is C$18.99 per kg. Specialty filaments (silk, wood, carbon fibre, nylon) cost more; the table above lists every material with its median and its cheapest price per kg. A refill without a spool is usually a little cheaper than the same filament on a spool.
Is resin printing more expensive than filament?
By the kilogram they are close: in Canada the median standard resin we track is C$22.99 per kg against C$19.99 for PLA. A resin miniature uses only a few ml, so the resin in one model is cheap. What the calculator does not count is resin's other consumables: isopropyl alcohol or a cleaning fluid for washing, gloves, paper towels and the release film in the vat, which wears out and needs replacing.
How much electricity does a 3D printer use?
A typical FDM printer with a heated bed averages roughly 100 to 150 W once it is up to temperature, more while it heats up and more in a cold room or with a heated enclosure. A resin printer draws less, roughly 30 to 70 W. The best figure is your own: a plug-in power meter shows it. Even long prints rarely cost much in electricity next to the material.
How do I find out how much material a print uses?
Slice the model: every slicer reports the filament in grams (and metres) or the resin in ml before you print. If you only have the volume of a model in cm³, multiply it by the material's density: about 1.24 g/cm³ for PLA, 1.27 for PETG and 1.1 for most resins. Remember infill: a slicer's estimate at 15% infill is far lighter than the solid volume.
What should I charge for a 3D print?
Start from the cost: material, electricity and a failure allowance, which the calculator works out. Add your time at an hourly rate (setting up, removing supports, cleaning and curing) and a markup for machine wear, spares and profit. Many sellers then check the result against what similar prints sell for.
Why are the prices different on each edition of this page?
Each edition prices material from the in-stock offers we track in its own market, in its own currency. Where a market has only a few listings of a material, the page says the supply is thin, and where it has none it asks you for your own price. Electricity defaults to a round household rate for the market (C$0.13 per kWh here); change it to the rate on your bill.
Shop the material on the filament and resin shelves, compare PETG and PLA, or paint what you print with the paint catalogue. More free tools on the tools page.