
Standard-size card sleeves with Pokémon art, 65 per pack
Ultra Pro
Pick a game to see its card size in mm and inches, which sleeve size fits, inner and outer, the toploader and deck box to use, and the ones you can buy that fit.
Pokémon TCG cards are standard size: 63 x 88 mm (2.48 x 3.46 in). They take standard size sleeves, about 66 x 91 mm for an outer sleeve. More on Pokémon card size.
Outer sleeves that fit
Inner sleeves that fit
Toploader
Deck box

Standard-size card sleeves with Pokémon art, 65 per pack
Ultra Pro

Standard-size card sleeves with Pokémon art, 65 per pack
Ultra Pro

Standard-size Pokemon art sleeves, 65 per pack
Ultra Pro

Standard-size art card sleeves, Pokémon Center Japan official sleeve line (one design)
The Pokémon Company

Standard-size art card sleeves, Pokémon Center Japan official sleeve line (one design)
The Pokémon Company

Standard-size art card sleeves, Pokémon Center Japan official sleeve line (one design)
The Pokémon Company
A standard 3" x 4" toploader takes a standard-size card, in a penny sleeve or bare.
Deck box capacity is quoted in sleeved cards. Check whether the maker means single or double sleeved: a box for 100 double-sleeved cards holds more single-sleeved ones.
Every sleeve here names its size in its maker's listing; a sleeve whose listing names no size is left out rather than guessed. More on the sleeves, toploaders and deck boxes shelves.
Nearly every trading card game prints standard-size cards. Yu-Gi-Oh! and Cardfight!! Vanguard print the smaller Japanese size.
| Game | Card size | Sleeve |
|---|---|---|
| Pokémon TCG | 63 x 88 mm 2.48 x 3.46 in | Standard size about 66 x 91 mm |
| Magic: The Gathering | 63 x 88 mm 2.48 x 3.46 in | Standard size about 66 x 91 mm |
| Yu-Gi-Oh! | 59 x 86 mm 2.32 x 3.39 in | Japanese size about 62 x 89 mm |
| 63 x 88 mm 2.48 x 3.46 in | Standard size about 66 x 91 mm | |
| 63 x 88 mm 2.48 x 3.46 in | Standard size about 66 x 91 mm | |
| 63 x 88 mm 2.48 x 3.46 in | Standard size about 66 x 91 mm | |
| 63 x 88 mm 2.48 x 3.46 in | Standard size about 66 x 91 mm | |
| 63 x 88 mm 2.48 x 3.46 in | Standard size about 66 x 91 mm | |
| 63 x 88 mm 2.48 x 3.46 in | Standard size about 66 x 91 mm | |
| 63 x 88 mm 2.48 x 3.46 in | Standard size about 66 x 91 mm | |
| 59 x 86 mm 2.32 x 3.39 in | Japanese size about 62 x 89 mm |
Card and sleeve sizes are the sleeve maker Ultimate Guard's published figures (Katana, Precise-Fit). Other makers' sleeves differ by a millimetre or so. Inches are converted from millimetres. A game we hold no published size for is not listed: measure a card against the two sizes above before you buy.
For which brand and finish to buy, and how to double sleeve, read our card sleeve sizes guide and the best card sleeves guide.
63 x 88 mm (2.48 x 3.46 in). Pokémon, Magic, Lorcana, One Piece, Riftbound, Flesh and Blood, Star Wars: Unlimited, Digimon, Dragon Ball Super all use it.
Yu-Gi-Oh! and Vanguard. Japanese-size cards are 59 x 86 mm (2.32 x 3.39 in) and take Japanese-size sleeves, about 62 x 89 mm.
A standard toploader is 3" x 4", made for standard-size cards.
An inner (perfect-fit) sleeve fits tight over the card, about 64 x 89 mm for standard size. An outer sleeve, about 66 x 91 mm, goes over it. Buy both from the same maker where you can, so one fits inside the other.