Hobby SupermarketHobbySupermarket

Do You Need a 3D Printer Enclosure? FDM and Resin Compared

Which filaments and resins an enclosure helps, what it does about fumes, and which enclosures are on sale in your market

An enclosure is a box or tent around the printer. It holds heat in, keeps draughts and dust out, and can keep noise and some smell down. Whether you need one depends on what you print: ABS and ASA warp in a cool, draughty room and are the reason enclosures exist; PLA and PETG mostly do not need one; resin printers want a steady, warm spot and a way to deal with the smell. Here are the enclosures on sale in your market:

ELEGOO 3D Printer Enclosure for Neptune 2/3/4 Series

Fold-up enclosure tent that keeps heat in and draughts out for ABS/ASA printing on a Neptune · Fits Neptune 2/2D/2S/3/3 Pro/4/4 Pro

ELEGOO

  • free US delivery over $50 (48 contiguous states + DC only), $15 flat rate below that, 3-7 business days · 14-day returns
VEVOR 3D Printer Enclosure S0001 (Oxford Cloth, 550 x 650 x 750 mm)

Fabric tent enclosure that goes over a 3D printer to hold temperature and keep dust off; LED light · S0001 · 600D Oxford cloth, inner composite aluminium film · 550 x 650 x 750 mm (L x W x H) · 3DDYJZRTWQWTKNHKO001V9 · 197988907336

VEVOR

Creality Ender-5 Max Enclosure

Purpose-built enclosure for the Ender-5 Max · Ender-5 Max

Creality

Creality K1 SE / K2 SE Enclosure

Purpose-built enclosure that closes in an open-frame K1 SE or K2 SE to hold heat and keep dust off · K1 SE, K2 SE · 4005010122

Creality

Do you need an enclosure?

You printEnclosure?Why
ABS or ASAYesThese plastics warp when they cool unevenly. An enclosure holds heat and stops draughts, but they also give off fumes when printed, so a closed box needs a vent to outside or a filter, and the room needs ventilating. See ASA vs ABS.
PETGOptionalA draught-free spot helps. Many people print it open.
PLAUsually notTrapped heat can soften PLA, so check your filament maker's temperature limits. Open or a vented lid is the common setup.
ResinA warm, ventilated cabinetResin cures and flows best in a steady room temperature, and the smell is the main complaint.
Any printer in a shared roomHelpsA closed box cuts dust and some noise.

If you print miniatures, the question is mostly about resin. Our resin vs FDM guide explains why, and best resin 3D printer for miniatures compares the machines.

Best 3D printer enclosure: tent or rigid?

A fabric tent is the cheapest way to enclose a printer. The VEVOR tents are made of 600D Oxford cloth with an inner aluminium-film layer, in sizes such as 550 x 650 x 750 mm, and some come with a window and an LED. A tent folds flat when you do not need it and fits more printers than a purpose-built enclosure. It does not give the same heat holding as a rigid box.

A rigid enclosure (acrylic panels or a metal frame) holds heat better and looks tidier. VEVOR's S0007 is a 600 x 600 x 800 mm acrylic-panel enclosure with ventilation, an LED and a thermo-hygrometer. A rigid box takes a fixed amount of room, and you have to check that your printer fits.

A purpose-built enclosure is made for one printer or one printer family. ELEGOO's fits the Neptune 2, 2D, 2S, 3, 3 Pro, 4 and 4 Pro; Creality makes ones for the Ender-5 Max and the K1 SE / K2 SE; Sovol makes one for the SV08 Max. If you own the matching printer, this is the simplest choice.

VEVOR 3D Printer Enclosure S0002 (Large, Oxford Cloth, 700 x 750 x 900 mm)

Large fabric tent enclosure that goes over a 3D printer to hold temperature and keep dust off; LED light · S0002 · 600D Oxford cloth, inner composite aluminium film · 700 x 750 x 900 mm (L x W x H) · 3DDYJZRTWQWTUY5RY001V9 · 197988170525

VEVOR

VEVOR 3D Printer Enclosure S0007 (Acrylic, Ventilated, 600 x 600 x 800 mm)

Rigid acrylic-panel 3D printer enclosure with ventilation, LED and thermo-hygrometer; titled for Bambu Lab, Ender, Neptune, Kobra · S0007 · Acrylic panels, PVC foam boards, metal frame · 600 x 600 x 800 mm (L x W x H) · 3DDYJZYTWQYTHD4YY001V9 · 197988168690

VEVOR

ELEGOO 3D Printer Enclosure for Neptune 2/3/4 Series

Fold-up enclosure tent that keeps heat in and draughts out for ABS/ASA printing on a Neptune · Fits Neptune 2/2D/2S/3/3 Pro/4/4 Pro

ELEGOO

  • free US delivery over $50 (48 contiguous states + DC only), $15 flat rate below that, 3-7 business days · 14-day returns

In the US the shops we track list VEVOR enclosures, TopCube enclosures for the Bambu Lab A1 and Phrozen's PentaShield Arco enclosure, as well as Creality's.

Resin printers: enclosure, purifier and ventilation

For resin, the point of an enclosure is the smell and the temperature. VEVOR sells a ventilated fabric tent for resin printers (the S0003, 550 x 650 x 750 mm) and Creality has an enclosure for resin printers. Activated-carbon air purifiers sit inside the printer's cover or the enclosure and are made by the printer makers: ELEGOO, Anycubic and Phrozen each sell one.

An enclosure around a resin printer traps fumes unless it has a vent to outside or a filter, and an activated-carbon purifier reduces smell but does not remove all vapour. An enclosure is not a substitute for ventilating the room. Put a resin printer in a room with a window, away from where you sleep and eat, wear nitrile gloves and eye protection when handling liquid resin, and read the resin's safety data sheet. Our curing resin prints guide has a section on a resin workspace, ventilation and the wash and cure station.

Phrozen Air Purifier Max

Ducted 6-layer air purifier for resin and FDM printers

Phrozen

  • 13-day returns

Filters, heaters and fans for FDM

An enclosure is the box. The parts that go with it are an air filter, a chamber heater and an exhaust fan, and each is made for specific printers. QIDI sells a 3-in-1 air filter for its Plus5 / Q2 and Max4 printers, Creality sells an FDM air purifier rated by its maker at 250 m³/h, and QIDI and Bambu Lab make chamber heaters and exhaust fans for their own printers. Check the model number before you buy: these are not universal.

QIDI Tech 3-in-1 Air Filter for Max4

Replacement chamber air filter · Max4

QIDI Tech

  • dispatched in 1–2 working days
Creality Air Purifier (FDM Version)

Air purifier for 3D printing, FDM-printer version · 250 m3/h · 1000 hours

Creality

What to buy

  • ABS or ASA on an open printer: a tent or a purpose-built enclosure that matches your printer.
  • A Bambu Lab, Creality or QIDI with its own enclosure option: the maker's own, first.
  • A resin printer in a shared room: a ventilated enclosure or an air purifier, plus a window.
  • A PLA printer in a quiet corner: probably nothing. Spend it on a filament dryer and proper filament storage instead.

If you are also deciding what to print on, best 3D printer for beginners covers the machines, and the workspace as a whole is in how to set up a miniature painting station.

Tips

  • Check the printer fits before you buy a rigid enclosure, and the filament spool and cables too.
  • Check your printer maker's chamber temperature limit before you close it in.
  • Do not seal a PLA printer without a way for the heat to escape.
  • A closed box needs a vent or filter for ABS, ASA and resin, or it concentrates the fumes.
  • Ventilate the room, whatever the box does.

Questions

Do I need an enclosure for a 3D printer?

For ABS and ASA, yes. For PLA and PETG, usually not. For resin, a warm, ventilated spot matters more than a sealed box.

Does an enclosure remove 3D printer fumes?

Not by itself. An enclosure with an activated-carbon filter or a vent to outside helps, and the room still needs ventilation.

Can I enclose a PLA printer?

You can, but trapped heat can soften PLA, so check your filament maker's limits and leave a way for heat to escape.

Tent or rigid enclosure?

A tent is cheaper and fits more printers. A rigid enclosure holds heat better and looks tidier. A purpose-built one is simplest if it exists for your printer.

Do resin printers need an enclosure?

Not strictly, but resin works best at a steady temperature and gives off a smell, so a ventilated cabinet or tent with a purifier is a common choice.

We compare what the makers and the shops we track publish, and their prices; we have not used these enclosures ourselves.

Price the hobby

Everything named on this site carries its price across the shops we track.

Hobby Supermarket

Prices on miniatures, paints, brushes, 3D printing and trading cards, compared across the shops we track in the UK, US, Europe, Canada and Australia.

Deals by email

Send me deals for
Tell us what you play (optional)
What are you into? (optional)
Which games?
Which card games?

As an Amazon Associate we earn from qualifying purchases. We also earn commission as a Wayland Games affiliate and through the eBay Partner Network, Awin and other retailer programmes. See how we make money.

Warhammer, Warhammer 40,000, Age of Sigmar, Citadel and Games Workshop are trademarks of Games Workshop Ltd. Magic: The Gathering is a trademark of Wizards of the Coast, Pokémon of Nintendo, Creatures and GAME FREAK, and Yu-Gi-Oh! of Konami. Other product and brand names belong to their owners. Hobby Supermarket is an independent, unofficial site, not affiliated with, endorsed or sponsored by any of them.

Featured on tools.cafe