Hobby SupermarketHobbySupermarket

Best Filament for 3D Printers: Terrain and Miniatures

Which filament to load for terrain, bases, vehicles and miniatures, and the spools worth buying for each

For most wargaming terrain, bases and scatter, the best filament is a matte or plain PLA in grey: it is the easiest to print on any open printer, holds sharp detail and takes primer like a plastic kit. Move to PLA+ for thin pieces that get handled, PETG for terrain that travels or lives somewhere warm, ASA for anything in the sun (on an enclosed printer), and TPU for parts that bend. These are 1 kg spools of each that the shops we compare sell, priced in your market:

ELEGOO PLA Matte Filament 1kg, Slate Grey

Matte PLA filament that hides layer lines · 1kg

ELEGOO

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
SUNLU PLA Filament 1kg, Grey

Standard PLA filament: the easiest material for terrain, props and display pieces · 1kg

SUNLU

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
ELEGOO PLA+ Filament 1kg, Grey

Tougher, less brittle PLA+ filament · 1kg

ELEGOO

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
ELEGOO Rapid PETG Filament 1kg, Grey

PETG filament tuned for high-speed printers · 1kg

ELEGOO

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
ELEGOO TPU 95A Filament 1kg, Grey

Flexible TPU 95A filament · 1kg

ELEGOO

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns

Why grey? A mid grey shows the detail on the printer bed, so you can judge a print before you prime it, and it hides a missed spot of primer better than black or white. The colour does not change how the filament prints or paints; buy whatever suits you.

Every spool we compare is on the filament shelf, with its own pages for PLA, PETG and TPU. The settings for sixteen filaments are in our filament temperature chart.

Which filament for 3D printed terrain, bases and minis

JobBest filamentWhy
Ruins, buildings, scatter and basesMatte PLA or PLAEasiest to print, crisp detail, primes like a plastic kit
Thin spires, railings, gantriesPLA+Same settings as PLA, but tougher where plain PLA snaps
Club terrain, case inserts, paint racksPETGTougher and copes with more heat; prints on an open printer
Terrain or displays in the sun or a hot carASAUV resistant and the most heat-tolerant here; needs an enclosure
Tank tracks, banners, cables, tray linersTPUFlexible, so it bends instead of breaking
Crates, planking, stone and display basesWood, marble or silk PLAA surface that looks finished before paint
28 mm infantry and charactersResin, not filamentFaces and hands come out sharper on a resin printer

The makers' figures side by side

Each maker publishes its own settings, and eSUN publishes a heat distortion temperature (the point where a loaded part starts to bend) for most of its lines, which gives one fair comparison of how much heat each material takes. These are eSUN's figures from its PLA-Basic, PLA+, ePLA-Matte, PETG, ASA+, ABS and eTPU-95A pages:

FilamentNozzleBedEnclosureHeat distortion
PLA210-230 °C45-60 °CNot needed54 °C
Matte PLA190-230 °C45-60 °CNot needed51 °C
PLA+210-230 °C45-60 °CNot needed54 °C
PETG240-260 °C75-90 °CNot needed64 °C
ABS255-275 °C95-110 °CYes78 °C
ASA250-280 °C90-110 °CYes96 °C
TPU (95A)220-250 °C45-60 °CNot neededNot stated

Other brands print in the same ranges, but your spool's label is the setting to start from. Prusa adds that PLA "gets soft and deforms at temperatures over 60 °C" (Prusa: PLA), which is the practical line between terrain that can sit in a hot car and terrain that cannot.

Best filament for terrain: PLA

PLA is the default because it asks the least of you and your printer. It prints at the lowest temperatures of the common filaments, barely warps, needs no enclosure and holds the edges of a brick wall or a ruined window sharply. It is the easiest of the common filaments to get right first time. The trade-off is that it is stiff and brittle, and it softens above 60 °C.

Plain PLA from the big printer makers is sold in every market we cover:

ELEGOO PLA Basic Filament 1kg, Grey

PLA filament: the easiest material for terrain, scenery, props and display pieces · 1kg

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
SUNLU PLA Filament 1kg, Grey

Standard PLA filament: the easiest material for terrain, props and display pieces · 1kg

SUNLU

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
QIDI Tech PLA Basic Filament 1kg, Gray

PLA filament: the easiest material for terrain, scenery, props and display pieces · 1kg

QIDI Tech

  • dispatched in 1–5 working days
Creality Hyper PLA RFID Filament 1kg, Grey

PLA filament: the easy all-rounder for terrain, bases and display prints · 1kg, 1.75 mm

Creality

  • free UK delivery over £99 · dispatched within 3 working days · 14-day returns
  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
Bambu Lab PLA Basic Filament 1kg, Gray

PLA filament: the easy all-rounder for terrain, bases and display prints · 1kg, 1.75 mm

Bambu Lab

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
eSUN PLA-Basic Filament 1kg, Grey

1.75 mm PLA filament for FDM printers · 1kg spool, 1.75 mm

eSUN

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
  • delivery 4–10 working days · 14-day returns

Matte PLA, if you will paint it

Matte PLA is the one we would point a painter to first. Its flat surface shows layer lines less under a thin coat of primer and paint than glossy PLA does, and it prints on the same open printer. eSUN gives its matte line a slightly lower nozzle range (from 190 °C) and a heat distortion figure of 51 °C, so treat it as a little more heat-shy than plain PLA.

ELEGOO PLA Matte Filament 1kg, Slate Grey

Matte PLA filament that hides layer lines · 1kg

ELEGOO

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
SUNLU Matte PLA Filament 1kg, Grey

Matte PLA filament that hides layer lines · 1kg

SUNLU

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
Bambu Lab PLA Matte Filament 1kg, Ash Gray

Matte PLA: hides layer lines and takes primer well, a good base for painted miniatures and terrain · 1kg, 1.75 mm

Bambu Lab

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
eSUN PLA-Matte Filament 1kg, Dark Grey

1.75 mm PLA filament for FDM printers · 1kg spool, 1.75 mm

eSUN

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
  • delivery 4–10 working days · 14-day returns

PLA+ for terrain that gets handled

PLA+ (or PLA Pro) is a maker's own tougher PLA. There is no standard for the plus, so each brand's is different, but eSUN's own figures show what it can change: its PLA+ takes more than twice the Izod impact of its PLA-Basic (7.27 against 3.25 kJ/m²) on identical print settings, with the same heat distortion. That is the filament for gantries, spires, railings and antennae that snap in plain PLA. It does not make PLA any more heat-proof. Our PLA vs PLA+ guide has the full comparison.

ELEGOO PLA+ Filament 1kg, Grey

Tougher, less brittle PLA+ filament · 1kg

ELEGOO

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
ELEGOO PLA Pro Filament 1kg, Grey

Tougher, less brittle PLA filament · 1kg

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
SUNLU PLA+ Filament 1kg, Black

Tougher, less brittle PLA+ filament · 1kg

SUNLU

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
eSUN PLA+ Filament 1kg, Grey

1.75 mm PLA filament for FDM printers · 1kg spool, 1.75 mm

eSUN

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
  • delivery 4–10 working days · 14-day returns
Anycubic PLA+ Filament 1kg, Texture Grey

Tougher, less brittle PLA+ filament · 1kg

Anycubic

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns

PETG for terrain that travels

PETG is tougher than PLA and takes more heat: eSUN puts its PETG at 64 °C heat distortion against 54 °C for its PLA, and Prusa recommends it for mechanical parts "for both indoor and outdoor use". For a wargamer that means club terrain that is packed every week, foam-tray replacements and carry-case inserts, paint racks, and storage on a sunny windowsill. It still prints on an open printer.

It strings more than PLA and prints hotter, on a hotter bed. Prusa warns it can bond too hard to a smooth PEI sheet, so print it on a textured plate or use glue stick as a release layer (our textured vs smooth PEI guide explains why). The full comparison is in PETG vs PLA.

ELEGOO Rapid PETG Filament 1kg, Grey

PETG filament tuned for high-speed printers · 1kg

ELEGOO

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
ELEGOO PETG Pro Filament 1kg, Grey

PETG filament: tougher and more heat-tolerant than PLA, easy to print · 1kg

ELEGOO

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
SUNLU PETG Filament 1kg, Black

PETG filament: tougher and more heat-tolerant than PLA, easy to print · 1kg

SUNLU

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
Creality Hyper PETG Filament 1kg, Black

PETG / co-polyester filament: tougher and more heat-resistant than PLA, still easy to print · 1kg, 1.75 mm

Creality

  • free UK delivery over £99 · dispatched within 3 working days · 14-day returns
  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
eSUN PETG-Matte Filament 1kg, Dark Grey

1.75 mm PETG filament for FDM printers · 1kg spool, 1.75 mm

eSUN

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
  • delivery 4–10 working days · 14-day returns

ASA and ABS, for heat and sun

ASA has the highest heat distortion figure in the table, 96 °C on eSUN's numbers, and Prusa calls it "more UV resistant" than ABS, with less warping and less smell. That suits a garden gaming table, a display in a sunny window, and terrain that rides in a hot car all summer. ABS is tougher on eSUN's impact figures and can be smoothed with acetone vapour, which suits a glossy vehicle hull.

Both need an enclosed printer: eSUN and Prusa each call for one. On an open printer, print PETG instead. Our ASA vs ABS and PLA vs ABS guides go through them, and do you need a 3D printer enclosure covers the hardware.

ELEGOO ASA Filament 1kg, Deep Black

UV- and weather-resistant ASA filament for outdoor parts · 1kg

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
QIDI Tech ASA Filament 1kg, Gray

ASA filament: UV- and weather-resistant, prints like ABS · 1kg

QIDI Tech

  • dispatched in 1–5 working days
eSUN ASA+ Filament 1kg, Grey

ASA filament: UV- and weather-resistant, for outdoor parts; needs a heated bed and ideally an enclosure · 1kg, 1.75 mm

eSUN

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
ELEGOO ABS Filament 1kg, Grey

ABS filament: tougher and more heat-resistant than PLA, needs a heated bed and ideally an enclosure · 1kg

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
Creality Hyper ABS Filament 1kg, Grey

ABS-family filament: tougher and more heat-resistant than PLA, needs a heated bed and ideally an enclosure · 1kg, 1.75 mm

Creality

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns

TPU for parts that bend

TPU is a flexible filament. Print tank tracks, banners and cables that bend instead of snapping, flexible bases, and soft liners for a dice tray or a case. eSUN asks for a direct-drive extruder and slow printing for its eTPU-95A, and Prusa says to keep part cooling off for flexibles, so check your printer's extruder before you buy a spool. The 95A on the label is its hardness: lower numbers are softer.

ELEGOO Rapid TPU 95A Filament 1kg, Black

Flexible TPU 95A filament tuned for faster printing · 1kg

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
ELEGOO TPU 95A Filament 1kg, Grey

Flexible TPU 95A filament · 1kg

ELEGOO

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
eSUN TPU-95A Filament 1kg, Grey

1.75 mm flexible filament for FDM printers · 1kg spool, 1.75 mm

eSUN

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
Anycubic TPU 95A Filament 1kg, Grey

Flexible TPU 95A filament · 1kg

Anycubic

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns

Wood, marble and silk PLA for display pieces

Specialty PLAs give a finish before any paint. Wood-fill prints crates, barrels and planking that can be sanded and stained; marble and stone-effect PLA suits plinths and display bases; silk PLA has a glossy sheen for trophies and objective markers left unpainted. Prusa notes wood-filled filament wants a 0.6 mm nozzle or larger, so a standard 0.4 mm nozzle can clog on it (see our nozzle size guide).

SUNLU Wood PLA Filament 1kg, Walnut Wood

Wood-filled PLA filament with a real-wood texture, good for terrain · 1kg

SUNLU

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
ELEGOO PLA Wood Filament 1kg, Oak Wood/Light Brown

Wood-filled PLA filament with a real-wood texture, good for terrain · 1kg

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
Creality CR-Wood Filament 1kg

PLA (wood) · 1kg · 1.75 mm

Creality

  • free UK delivery over £99 · dispatched within 3 working days · 14-day returns
ELEGOO PLA Marble Filament 1kg, Marble

PLA with a stone-like marble fleck, good for terrain and bases · 1kg

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
ELEGOO PLA Silk Filament 1kg, Silk Gold

High-gloss silk-finish PLA filament for display pieces · 1kg

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns

Carbon-fibre and glass-fibre filled spools (PLA-CF, PETG-CF) are stiffer and hide layer lines well, but Prusa says they are abrasive and need a hardened nozzle. They suit hobby jigs and display stands more than detailed terrain.

Best filament for miniatures

If you want to print 28 mm or 32 mm miniatures, the honest answer is resin, not filament. A filament printer lays down lines of plastic around 0.4 mm wide, so faces, hands and fine weapons come out softer than on a resin printer, and supports leave more marks. Filament is very good at the bigger things: vehicles, walkers, monsters, bases and terrain. Our resin vs FDM guide explains the trade-off, and best resin for miniatures compares the resins.

If you do print figures on a filament printer, use a matte PLA, a smaller nozzle (0.2 or 0.25 mm) and fine layers, and print one model at a time. A resin starting point, for comparison:

ELEGOO Standard Resin 1kg, Grey

General-purpose UV printer resin: the baseline chemistry, not water-washable · 1000g

ELEGOO

  • postage per seller
  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
ELEGOO 8K Water-Washable Resin V2.0 1kg, Space Grey

Water-washable UV printer resin tuned for 8K-display printers, second-generation formula · 1000g

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
  • postage per seller
ELEGOO Water-Washable ABS-Like Resin 1kg, Black

Water-washable ABS-like UV printer resin, combining easy clean-up with ABS-like toughness · 1000g

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns

Painting prints and keeping spools dry

Every filament here takes acrylic paint once it is primed. Sand the layer lines on flat walls first if they bother you, prime with a spray or brush-on primer made for plastics, and then paint as you would a plastic kit. Our how to paint 3D prints and sanding 3D prints guides cover each step. A grey primer suits most terrain, and a primer with a filler in it fills fine layer lines as it goes:

Grey Primer

AK Interactive

from £6.75· compare 4 shops· priced 13 Sep
from was £2.99, now £2.85 with our link· compare 8 shopsExclusive: 5% off using our link only

Most filament takes on moisture once the bag is open, and a damp spool strings and prints rough, weak walls. PETG and TPU suffer more than PLA. Prusa dries PLA at 45 °C for six hours, PETG at 55 °C and TPU at 60 °C. A dryer rescues a damp roll and a sealed box keeps it dry: see our filament dryer guide and filament storage guide.

ELEGOO H1 HT Filament Dryer

Filament dryer box that bakes moisture out of a spool

ELEGOO

  • free UK delivery over £40, £6 flat rate below that, 3-7 business days · 14-day returns
Creality SpacePi X4L Filament Dryer

Filament dryer for four spools, two independent heating chambers · 75 C

Creality

  • free UK delivery over £99 · dispatched within 3 working days · 14-day returns
SUNLU FilaDryer SP2

Split filament dryer: a heating base plus a sealed storage box that doubles as dry storage

SUNLU

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns
Creality SpacePi X4 Filament Dryer

Filament dryer for four spools, two independent 200W PTC chambers, desiccant regeneration · 85 C

Creality

  • free UK delivery over £99 · dispatched within 3 working days · 14-day returns
Polymaker PolyDryer Box

Extra sealed drying/storage box for the PolyDryer dock

Polymaker

  • £8.90 UK delivery, 6 working days, free over £69.90 · 30-day returns

To see what a piece of terrain costs in each filament, try the 3D print cost calculator.

The filament comparisons in full

  • PETG vs PLA: the two open-printer filaments for terrain
  • PLA vs PLA+: what the plus buys you, on one maker's figures
  • PLA vs ABS: the easy filament against the tough one
  • ASA vs ABS: the UV-resistant successor to ABS

Questions

What is the best filament for 3D printers?

For most people, PLA. It prints on any open printer at low temperatures, barely warps and holds fine detail. Choose PETG for tougher parts that take more heat, ASA for sun and heat on an enclosed printer, and TPU for parts that need to flex.

What is the best filament for 3D printing terrain?

Matte or plain PLA for most terrain. It is the easiest filament to print, needs no enclosure, holds sharp detail and primes like a plastic kit. Use PETG for pieces that are handled, transported or kept somewhere warm.

What is the best filament for printing miniatures?

For 28 mm infantry, resin gives far sharper faces and hands than any filament. On a filament printer, matte PLA with a 0.2 or 0.25 mm nozzle and fine layers gives the best detail, and filament is very good for vehicles, monsters and bases.

Is PLA or PETG better for wargaming terrain?

PLA for most terrain, because it prints most easily and keeps detail crisp. PETG is tougher and takes more heat (64 °C against 54 °C heat distortion on eSUN's figures), so it suits club terrain and anything packed and carried often.

Does filament colour matter for painting?

Not for how it prints or paints. A mid grey shows detail on the printer and hides gaps in the primer, which is why grey is a common choice for terrain that will be painted.

Do I need an enclosed printer?

Not for PLA, PLA+, PETG or TPU. eSUN and Prusa both call for an enclosure for ABS and ASA.

We compare the makers' published figures and the prices at the shops we track; we have not printed with these spools ourselves.

Price the hobby

Everything named on this site carries its price across the shops we track.

Hobby Supermarket

Prices on miniatures, paints, brushes, 3D printing and trading cards, compared across the shops we track in the UK, US, Europe, Canada and Australia.

Deals by email

Send me deals for
Tell us what you play (optional)
What are you into? (optional)
Which games?
Which card games?

As an Amazon Associate we earn from qualifying purchases. We also earn commission as a Wayland Games affiliate and through the eBay Partner Network, Awin and other retailer programmes. See how we make money.

Warhammer, Warhammer 40,000, Age of Sigmar, Citadel and Games Workshop are trademarks of Games Workshop Ltd. Magic: The Gathering is a trademark of Wizards of the Coast, Pokémon of Nintendo, Creatures and GAME FREAK, and Yu-Gi-Oh! of Konami. Other product and brand names belong to their owners. Hobby Supermarket is an independent, unofficial site, not affiliated with, endorsed or sponsored by any of them.

Featured on tools.cafe