Gundam Markers are paint markers made by GSI Creos (Mr. Hobby) for Gunpla. If you buy one, buy a panel lining marker: a fine black or grey tip traced into the recessed lines of a kit makes it look finished in an evening, with no paint, brush or thinner. After that come colour markers for touching up the small details a kit's plastic and stickers miss, Real Touch markers for shading and weathering, and EX markers for bright metallics. A first build needs only these:
The shops we compare in the UK sell very few Gundam Markers yet, so most marker cards on this page are missing here. Panel lining does not need a Gundam Marker: the panel liners and panel line washes below do the same job and are sold in the UK, and the rest of this guide explains which to use.
AK Interactive
AK Interactive
AK Interactive
AK Interactive
Every card is priced at the shops we compare in your market, and anything none of them sells where you are is left out. The technique, step by step, is in how to panel line Gunpla, and every Gundam Marker set we track is on the Gundam paint sets page.
Gundam Marker types at a glance
| Type | Codes | What it does, and when to buy it |
|---|---|---|
| Panel Lining Fine | GM01 black, GM02 gray, GM03 brown | A fine tip drawn along panel lines; your first build |
| Panel Lining Brush | GM20 black, GM21 gray | A soft brush tip for wider lines and curves; bigger kits, rounded parts |
| Pour Type | GM301 black, GM302 gray, GM303 brown | Ink that flows into a line from a touched tip; deep or long lines, fast |
| Colour markers | GM04 to GM19 singly; GM22, GM34 to GM45, GM185 to GM190 in sets only | Opaque colour in a marker; touch-ups and small details |
| Real Touch | GM401 to GM410, GM400 blending pen | Soft shading colours that blend; shading, weathering, a less toy-like finish |
| EX | XGM01 to XGM08 | Bright, high-shine metallics and a strong white; gold trim, chrome-look details |
| EX Plated and Holographic | XGM100, XGM201 to XGM205 | A mirror-like plated look, or a holographic flake; show pieces and special parts |
| Clear coat markers | GM501 gloss, GM502 matte | A clear marker over small areas; sealing a small detail |
| Erasers | GM300, GM310 for pour type | Remove marker ink; cleaning up mistakes |
The codes are GSI Creos's own, so they are the quickest way to find the same marker at another shop.
Gundam panel line markers: buy these first
Panel lining is the single biggest improvement to a straight-built kit. Every Gunpla kit has recessed lines moulded into its armour; darkening them separates the panels and gives the kit depth.
- Which colour? Black for dark parts and most mid-tones, gray for white parts (black can look harsh on white plastic), and brown for red, yellow and tan parts. A gray and a black cover most kits.
- Fine tip (GM01 to GM03) is drawn along the line like a pen, and is the easiest for a first build.
- Brush tip (GM20, GM21) is softer and better on curved parts and wider lines.
- Pour type (GM301 to GM303) has ink that flows into the line by itself when the tip touches it, which is quicker on long lines and deep recesses. Wipe off what spills with an eraser marker or a cotton bud.
The alternative to markers: panel line washes
A panel line wash is a thin paint flowed into the lines with a fine brush. It takes a little longer than a marker, but it gets into the deepest lines and comes in more colours. Tamiya Panel Line Accent Color, AK Interactive's precision panel liners and AMMO by Mig's panel line washes are the common choices.
AK's and Mig's are sold in the UK, where Gundam Markers are thin.
AK Interactive
AK Interactive
AK Interactive
AK Interactive
Mig
Mig
Mig
Colour markers: touch-ups and details
Gunpla is moulded in colour, but most kits leave small details for you to colour in: sensors, vents, thrusters and the eyes if you skip the sticker. The colour markers are matched to Gundam colours: GM06 Gundam Blue, GM07 Gundam Red, GM08 Gundam Yellow and GM11 Gundam White for the classic white, blue, red and yellow scheme, GM09 Gundam Eye Green for the eyes, and metallics such as GM04 Gundam Gold, GM05 Gundam Silver and GM22 Gundam Gun Metallic (sold only in sets) for frames and weapons.
Series sets group the colours one show needs (the Gundam timeline places every show): the Basic Set (GMS105), the Zeon Set (GMS108), the SEED Basic Set (GMS109) and the MSV Set (GMS127). Several colours, such as GM22 Gundam Gun Metallic, the Zaku greens, the SEED and MSV shades and Char's Red, are only sold inside these sets. The Gundam Assemble Paint Pack 01 (PA01) beside them is a set of bottled paints for Bandai's Gundam Assemble miniatures game, not markers.
Where Gundam Markers are thin, a general acrylic paint marker does the same touch-up job. AK Interactive's Playmarkers and Quick Markers are sold in all five of our markets.
AK Interactive
AK Interactive
AK Interactive
AK Interactive
AK Interactive
AK Interactive
AK Interactive
Real Touch markers: shading and weathering
Real Touch and EX markers are not sold by the shops we compare in the UK yet, so the cards in these two sections are empty here.
Real Touch markers are softer, semi-transparent colours for shading and weathering rather than solid colour: a gray to shade white armour, a brown for dirt, an orange for rust or a red for heat staining. They are applied and then smoothed out with the GM400 Real Touch Blending Pen, which softens the edge so the colour fades into the plastic. They are the easiest way to give a kit a used, less toy-like look without an airbrush.
EX, Plated and Holographic markers: bright metallics
The EX range (XGM codes) is for the parts that should shine. XGM02 Shine Silver, XGM07 White Gold and XGM08 Yellow Gold are bright metallics for trim, and XGM01 New White is a strong opaque white. XGM100 Gundam Plated Silver gives a mirror-like plated look, and the Holographic markers (XGM201 to XGM205) add a holographic shimmer, each named after an effect from the shows, such as XGM202 Trans-AM Holographic Red.
For a larger area, the Gundam Marker Airbrush System (GMA01) sprays from a Gundam Marker instead of a brush stroke, for an even coat on a whole part.
Top coats: finish the kit
A top coat over the whole kit evens out the shine of plastic, stickers and marker, and protects the panel lines from being rubbed off by handling. A matt top coat hides the plastic look best. The GM501 gloss and GM502 matte clear markers cover a small area; for a whole kit, a spray varnish or Mr. Hobby's Super Clear is quicker. The matt varnish guide compares them, and how to panel line Gunpla covers the top coat step.

Matt anti-shine topcoat, 400ml aerosol
Army Painter

Matt protective topcoat, 18ml dropper
Army Painter


Water-based acrylic matt topcoat aerosol; permanent, non-removable, non-yellowing · 400ml
Vallejo
Vallejo
Vallejo
Apply stickers and water-slide decals before the top coat, so it seals them too. How to apply water-slide decals to Gunpla covers the order.
Best Gundam Markers for beginners: what to buy first
- A panel lining marker in black and one in gray. GM01 and GM02 fine tips are the easiest start. Where they are not sold, a black and a gray panel liner or panel line wash does the same job.
- An eraser (GM300, or GM310 for pour type) to clean up mistakes.
- The colour markers your kit's details need, often GM09 Gundam Eye Green and a red or yellow for small details. A series set is better value if you build from one show.
- A matt top coat to finish.
- Later: Real Touch markers for weathering, and EX markers for bright metallic trim.
New to Gunpla? Best Gunpla for beginners suggests a first kit, Gunpla grades explained covers the grades, and Gunpla tools lists the nippers and knife you need before any marker.
Are Gundam Markers good for beginners?
Yes. A panel lining marker is the easiest way to improve a first kit, with no paint, brush or thinner. Draw along the recessed lines and wipe off any mistakes with an eraser marker or a cotton bud.
Gundam Marker or Tamiya Panel Line Accent Color?
A Gundam Marker is quicker and tidier for a first kit. Tamiya Panel Line Accent Color is a thin wash applied with a brush, which takes longer but flows into the deepest lines and comes in more colours. Many builders use both.
Which Gundam Marker should I buy first?
A panel lining marker. GM01 (black) and GM02 (gray) fine-tip panel lining markers are the easiest start. Use gray on white parts and black on darker ones.
What is the difference between fine, brush and pour type Gundam Markers?
The fine tip is drawn along a panel line like a pen. The brush tip is softer and suits curves and wider lines. The pour type flows ink into the line by itself when the tip touches it, which is fast on long or deep lines but needs wiping off the surface afterwards.
What are Gundam Marker Real Touch markers for?
Shading and weathering. They are softer, semi-transparent colours that are applied and then smoothed out with the GM400 blending pen, for a used, less toy-like finish.
Do you need to top coat Gundam Markers?
It is a good idea. A top coat protects panel lines and marker colour from being rubbed off by handling, and a matt top coat hides the shine of the plastic and stickers.
What can I use instead of a Gundam Marker for panel lining?
A panel line wash, such as Tamiya Panel Line Accent Color, AK Interactive's precision panel liners or AMMO by Mig's panel line washes, applied with a fine brush. It takes a little longer than a marker but gets into the deepest lines.

![Gundam Assemble Paint Pack 01 [PA01]](/images/sets/gundam-assemble-paint-pack-01-pa01.webp)