For 28 mm and 32 mm miniatures, a resin printer is the machine to buy: it prints faces, hands and fine armour detail that a filament printer cannot match. The two numbers that matter most are the XY resolution (the size of one pixel on the screen, in microns: smaller is finer) and the build volume (how many models fit on one plate). These are the resin printers sold in the most markets by the shops we track:

9K, 7-inch monochrome LCD resin printer, the upgraded Mars 5 model
ELEGOO

12K, 10-inch monochrome LCD resin printer, the upgraded Saturn 4 model
ELEGOO

16K, 10-inch monochrome LCD resin printer, the flagship Saturn model
ELEGOO
Every resin printer we track is on the 3D printers shelf, priced in your currency.
How we chose
We compare the figures each printer's listing states, read from 3DJake's product pages for the ELEGOO, Anycubic and Phrozen machines (3DJake is one of the shops we track, and it lists the makers' specifications in full), and the prices at the shops we track in your market. We have not printed on these machines. The picks lean towards printers several shops sell, so you can compare prices, and towards the sizes most painters print at.
Resin printers for miniatures compared
| Printer | Screen | XY resolution | Build volume (mm) | Stated extras |
|---|---|---|---|---|
| ELEGOO Mars 5 | 6.6-inch, 4K | 35 x 35 µm | 143.43 x 89.6 x 150 | Automatic levelling |
| ELEGOO Mars 5 Ultra | 7-inch, 9K | 18 x 18 µm | 153.36 x 77.76 x 165 | Tilt release, AI camera, automatic levelling |
| Anycubic Photon Mono 4 | 7-inch, 10K | 17 x 17 µm | 153.4 x 87 x 165 | |
| Anycubic Photon Mono 4 Ultra | 7-inch, 10K | 17 x 17 µm | 153.4 x 87 x 165 | |
| Phrozen Sonic Mini 8K S | 7.1-inch, 8K | 22 µm | 165 x 72 x 170 | |
| ELEGOO Saturn 4 Ultra | 10-inch, 12K | 19 x 24 µm | 218.88 x 122.88 x 220 | Tilt release, AI camera, automatic levelling |
| ELEGOO Saturn 4 Ultra 16K | 10-inch, 16K | 14 x 19 µm | 211.68 x 118.37 x 220 | Tilt release, AI camera, heated resin tank |
| Anycubic Photon P1 | 10.1-inch, 14K | 16.8 x 24.8 µm | 223 x 126 x 230 | Levelling, AI error detection, tank temperature control 20 to 40 °C |
Figures from 3DJake's product pages for each printer, read on 11 November 2026. A blank cell means the listing does not state that feature, not that the printer lacks it. The Saturn 4 Ultra 16K's 10-inch screen size is from our catalogue.
Best small resin printer for miniatures
A 7-inch printer is the smaller, cheaper size. It needs less resin to fill its tank than a 10-inch machine, and its plate suits a few infantry models or one large character at a time.
The ELEGOO Mars 5 Ultra is sold by the shops we track in all five markets, with 18 µm pixels and stated tilt-release and AI camera features. The Anycubic Photon Mono 4 and the Mono 4 Ultra share the finest pixels of the small printers here, 17 µm, and the largest plate. The Phrozen Sonic Mini 8K S has the tallest build, 170 mm.

9K, 7-inch monochrome LCD resin printer, the upgraded Mars 5 model
ELEGOO

4K, 6.6-inch monochrome LCD resin printer, current entry-level Mars model
ELEGOO
Choosing between ELEGOO's two sizes? Elegoo Mars vs Saturn counts how many bases each plate holds.
Best large resin printer: whole units and vehicles
A 10-inch printer fits a full unit, a vehicle hull or a batch of bases in one run. It costs more and uses more resin to fill its tank, but it saves the most time once you print every week.
The ELEGOO Saturn 4 Ultra 16K has the smallest stated pixels of every printer in this guide, 14 x 19 µm, and a heated resin tank. The ELEGOO Saturn 4 Ultra has a slightly bigger plate at 12K. The Anycubic Photon P1 has the largest plate here, 223 x 126 x 230 mm, and lists tank temperature control from 20 to 40 °C.

16K, 10-inch monochrome LCD resin printer, the flagship Saturn model
ELEGOO

12K, 10-inch monochrome LCD resin printer, the upgraded Saturn 4 model
ELEGOO


12K mono-LCD MSLA resin printer, the upgraded Saturn 3 model
ELEGOO
A printer and wash station in one box
ELEGOO sells the Saturn 4 Ultra 16K with its Mercury XS wash and cure stations as one bundle. You will need a way to wash and cure every print, so a bundle saves buying the second machine separately. Our curing guide covers the stations.
The shops we track do not sell these bundles in this edition, so buy the printer and a station separately; the stations are compared in the curing guide.
In this edition the shops we track sell fewer resin printers than in the UK, US or EU, mostly ELEGOO's own range. The cards above show only the ones you can buy here.
What else you need to print
You will need more than the printer:
- Resin. Standard, ABS-like or water-washable: our resin guide explains which suits miniatures.
- A wash and cure station, or a tub of isopropyl alcohol and a UV lamp. See the curing guide.
- Release film. The FEP or similar film in the tank is a wear part. Our film and maintenance shelf lists replacements by printer.
- Gloves. Phrozen's own guidance is that standard resin needs "gloves, and protective equipment to safely handle the chemicals involved".
The whole process, from file to painted model, is in how to 3D print miniatures. If you also want terrain, our resin vs FDM guide explains why most people end up with a filament printer for scenery.
Questions
What resolution do I need for 28 mm miniatures?
Every printer in the table above has pixels of 35 µm or smaller. Smaller pixels show finer detail; the finest stated here are the Saturn 4 Ultra 16K's 14 x 19 µm and the Photon Mono 4's 17 x 17 µm.
Is a bigger resin printer better?
Only if you print in batches. A 10-inch printer fits more on one plate, but uses more resin to fill and costs more. A 7-inch printer suits most painters who print a squad at a time.
Which resin printer is best for beginners?
A 7-inch printer that the shops in your market sell, such as the ELEGOO Mars 5 Ultra, which the shops we track sell in all five markets. Pair it with a wash and cure station and a water-washable or standard resin.
Is resin printing safe at home?
Treat liquid resin as a chemical and follow the safety sheet for the resin you buy. Phrozen's own guidance is that standard resin needs gloves and protective equipment.
We sell no 3D models and host no files: print only files you have the right to print, from their sculptor or publisher.
