Hobby SupermarketHobbySupermarket

Best Multi-Colour 3D Printer (2026): Systems Compared

Four-colour printing comes from a filament unit beside the printer or from several toolheads, and the shops in your market sell a different set of each

A multi-colour 3D printer prints one object in several filament colours without you stopping to swap spools. Almost every one is a filament (FDM) printer sold as a "Combo": the printer plus the maker's multi-spool unit, which feeds the nozzle from several spools in turn. These are the multi-colour printers the shops we track sell in your market:

ELEGOO Centauri 2 Combo FDM 3D Printer

Enclosed CoreXY FDM printer sold with ELEGOO's CANVAS multi-colour unit: the Centauri 2 for four-colour printing

ELEGOO

  • free CA delivery over C$65, a C$20 flat rate below that, 3-7 workdays · 14-day returns
ELEGOO Centauri Carbon 2 Combo FDM 3D Printer

Enclosed CoreXY high-speed FDM printer sold with the CANVAS multi-colour unit: ELEGOO's flagship for four-colour printing

ELEGOO

  • free CA delivery over C$65, a C$20 flat rate below that, 3-7 workdays · 14-day returns
Creality K2 Combo

Enclosed CoreXY FDM printer with the CFS multi-colour unit

Creality

QIDI Tech Q2 Combo

Compact enclosed CoreXY FDM printer with QIDI Box

QIDI Tech

  • dispatched in 1–3 working days
QIDI Tech Plus5 Combo

Enclosed CoreXY FDM printer with QIDI Box

QIDI Tech

  • dispatched in 1–3 working days

Each printer above is sold with the multi-colour unit as the maker's named Combo. The plain version of the same printer is a single-colour machine, and the unit is a separate purchase, so the Combo is normally the better deal. If one colour is enough, our best 3D printer for beginners covers the single-colour machines.

How the multi-colour systems work

There are two designs, and they behave differently.

A filament unit feeding one nozzle. A box beside the printer holds several spools. To change colour, the printer retracts the old filament, pulls the new one through a tube and pushes it into the same nozzle. This is the design behind ELEGOO's CANVAS, Creality's CFS, Anycubic's ACE Pro and ACE 2 Pro, QIDI Box and Bambu Lab's AMS. It is the cheaper design, because the printer still has one hotend, and it is what almost every Combo is.

A toolchanger. Each colour has its own toolhead and the printer picks up the one it needs. There is no filament to retract and push through, so colour changes are faster and waste far less plastic. The Snapmaker U1 is a toolchanger, and Prusa sells large tool-changing printers such as the Prusa XL. They cost more than the filament-unit printers.

How many colours a system supports varies by model. The ELEGOO Centauri Carbon 2 Combo is listed for four-colour printing, and the Anycubic Kobra X Combo is listed for seven-colour printing. Check the listing for the exact count before you buy.

Waste: the real cost of colour changes

A single-nozzle printer cannot switch colour cleanly. After each change it pushes the old colour out of the nozzle, and that plastic is thrown away as a purge. A print with many colour changes, or many small areas of colour, can throw away more filament than the model itself, and the smaller the print, the worse the ratio.

Three things reduce it. Use fewer colour changes. Choose designs with large areas of each colour rather than fine mixed detail. Or buy a toolchanger, whose design avoids most of the purge (the cards below show the ones sold in your market). If you are on a budget, plan to buy filament for the waste as well as for the model.

Creality K2 Plus Combo

Large enclosed CoreXY FDM printer with the CFS multi-colour unit

Creality

Which system is best for you

Cheapest way in: the ELEGOO Centauri 2 Combo and Centauri Carbon 2 Combo pair an enclosed CoreXY printer with the CANVAS unit, and the shops we track sell both in all five markets.

The widest choice of maker: Creality's K2 Combo and K2 Plus Combo use the CFS unit, QIDI's Q2, Q2C, Plus5 and Max4 Combos use the QIDI Box, and Anycubic's Kobra S1, Kobra 4 and Kobra X Combos use the ACE Pro or ACE 2 Pro unit, which also dries filament while it prints.

ELEGOO Centauri 2 Combo FDM 3D Printer

Enclosed CoreXY FDM printer sold with ELEGOO's CANVAS multi-colour unit: the Centauri 2 for four-colour printing

ELEGOO

  • free CA delivery over C$65, a C$20 flat rate below that, 3-7 workdays · 14-day returns
Creality K2 Plus Combo

Large enclosed CoreXY FDM printer with the CFS multi-colour unit

Creality

QIDI Tech Max4 Combo

Large enclosed CoreXY FDM printer with QIDI Box

QIDI Tech

  • dispatched in 1–3 working days
QIDI Tech Q2C Combo

The Q2C printer with a QIDI Box multi-colour filament unit

QIDI Tech

  • dispatched in 1–3 working days

The shops we track do not sell Bambu Lab printers or the Snapmaker U1 toolchanger in this edition, so the picks here are ELEGOO, Creality and QIDI Combos, which do the same job. The cards show only the printers sold in your market.

What multi-colour means for miniatures and terrain

Miniatures. A multi-colour filament printer is not a way to print painted 28 mm figures. A colour region cannot be much narrower than the line the nozzle lays down, and eyes, faces and fine trim are smaller than that. Print miniatures in resin and paint them: see our resin printer guide and how to 3D print miniatures.

Terrain, bases and tokens. This is where multi-colour printing helps. Objective markers, counters, dice towers, movement trays and two-tone scenery can come off the plate finished with no paint. A single-colour printer can make all of it too, but then you paint it: see how to paint 3D prints.

Filament. These printers use standard filament such as PLA and PETG. Our filament storage guide and filament dryer guide cover keeping several spools dry.

ELEGOO Centauri Carbon 2 Combo FDM 3D Printer

Enclosed CoreXY high-speed FDM printer sold with the CANVAS multi-colour unit: ELEGOO's flagship for four-colour printing

ELEGOO

  • free CA delivery over C$65, a C$20 flat rate below that, 3-7 workdays · 14-day returns
Creality K2 Combo

Enclosed CoreXY FDM printer with the CFS multi-colour unit

Creality

QIDI Tech Plus5 Combo

Enclosed CoreXY FDM printer with QIDI Box

QIDI Tech

  • dispatched in 1–3 working days

Printers under a set budget are on the 3D printers shelf, where you can filter by price in your own currency.

Questions

What is the cheapest multi-colour 3D printer?

The cheapest are the filament-unit Combos from ELEGOO, Creality, QIDI and Anycubic. The cards above carry the live shop prices in your market, so compare them there.

What is the difference between AMS, CFS and CANVAS?

They are the same idea from different makers. AMS is Bambu Lab's, CFS is Creality's, CANVAS is ELEGOO's, ACE is Anycubic's and QIDI Box is QIDI's. Each holds several spools and feeds one nozzle, and each is sold for its own maker's printers.

Do multi-colour printers waste filament?

Yes. A single-nozzle printer purges the old colour at every change, and a print with many changes can throw away more plastic than the model uses. A toolchanger such as the Snapmaker U1 avoids most of the purge.

Can I print painted-looking miniatures on a multi-colour printer?

Not at 28 mm. Faces and trim are smaller than the printer can colour, so print miniatures in resin and paint them. Multi-colour suits terrain, markers and tokens.

Can I add a multi-colour unit to a single-colour printer later?

Often yes, if the maker sells the unit for your model, but the Combo is normally the better deal. Check the unit is listed as compatible with your exact printer.

We sell no 3D models and host no files: print only files you have the right to print, from their sculptor or publisher.

Price the hobby

Everything named on this site carries its price across the shops we track.

Hobby Supermarket

Prices on miniatures, paints, brushes, 3D printing and trading cards, compared across the shops we track in the UK, US, Europe, Canada and Australia.

Deals by email

Send me deals for
Tell us what you play (optional)
What are you into? (optional)
Which games?
Which card games?

As an Amazon Associate we earn from qualifying purchases. We also earn commission as a Wayland Games affiliate and through the eBay Partner Network, Awin and other retailer programmes. See how we make money.

Warhammer, Warhammer 40,000, Age of Sigmar, Citadel and Games Workshop are trademarks of Games Workshop Ltd. Magic: The Gathering is a trademark of Wizards of the Coast, Pokémon of Nintendo, Creatures and GAME FREAK, and Yu-Gi-Oh! of Konami. Other product and brand names belong to their owners. Hobby Supermarket is an independent, unofficial site, not affiliated with, endorsed or sponsored by any of them.

Featured on tools.cafe