An enclosure is a box or tent around the printer. It holds heat in, keeps draughts and dust out, and can keep noise and some smell down. Whether you need one depends on what you print: ABS and ASA warp in a cool, draughty room and are the reason enclosures exist; PLA and PETG mostly do not need one; resin printers want a steady, warm spot and a way to deal with the smell. Here are the enclosures on sale in your market:

Fold-up enclosure tent that keeps heat in and draughts out for ABS/ASA printing on a Neptune · Fits Neptune 2/2D/2S/3/3 Pro/4/4 Pro
ELEGOO

3D printer enclosure · Small
Creality

Purpose-built enclosure for the Ender-5 Max · Ender-5 Max
Creality
Do you need an enclosure?
| You print | Enclosure? | Why |
|---|---|---|
| ABS or ASA | Yes | These plastics warp when they cool unevenly. An enclosure holds heat and stops draughts, but they also give off fumes when printed, so a closed box needs a vent to outside or a filter, and the room needs ventilating. See ASA vs ABS. |
| PETG | Optional | A draught-free spot helps. Many people print it open. |
| PLA | Usually not | Trapped heat can soften PLA, so check your filament maker's temperature limits. Open or a vented lid is the common setup. |
| Resin | A warm, ventilated cabinet | Resin cures and flows best in a steady room temperature, and the smell is the main complaint. |
| Any printer in a shared room | Helps | A closed box cuts dust and some noise. |
If you print miniatures, the question is mostly about resin. Our resin vs FDM guide explains why, and best resin 3D printer for miniatures compares the machines.
Best 3D printer enclosure: tent or rigid?
A fabric tent is the cheapest way to enclose a printer. The VEVOR tents are made of 600D Oxford cloth with an inner aluminium-film layer, in sizes such as 550 x 650 x 750 mm, and some come with a window and an LED. A tent folds flat when you do not need it and fits more printers than a purpose-built enclosure. It does not give the same heat holding as a rigid box.
A rigid enclosure (acrylic panels or a metal frame) holds heat better and looks tidier. VEVOR's S0007 is a 600 x 600 x 800 mm acrylic-panel enclosure with ventilation, an LED and a thermo-hygrometer. A rigid box takes a fixed amount of room, and you have to check that your printer fits.
A purpose-built enclosure is made for one printer or one printer family. ELEGOO's fits the Neptune 2, 2D, 2S, 3, 3 Pro, 4 and 4 Pro; Creality makes ones for the Ender-5 Max and the K1 SE / K2 SE; Sovol makes one for the SV08 Max. If you own the matching printer, this is the simplest choice.

Fold-up enclosure tent that keeps heat in and draughts out for ABS/ASA printing on a Neptune · Fits Neptune 2/2D/2S/3/3 Pro/4/4 Pro
ELEGOO
Resin printers: enclosure, purifier and ventilation
For resin, the point of an enclosure is the smell and the temperature. VEVOR sells a ventilated fabric tent for resin printers (the S0003, 550 x 650 x 750 mm) and Creality has an enclosure for resin printers. Activated-carbon air purifiers sit inside the printer's cover or the enclosure and are made by the printer makers: ELEGOO, Anycubic and Phrozen each sell one.
An enclosure around a resin printer traps fumes unless it has a vent to outside or a filter, and an activated-carbon purifier reduces smell but does not remove all vapour. An enclosure is not a substitute for ventilating the room. Put a resin printer in a room with a window, away from where you sleep and eat, wear nitrile gloves and eye protection when handling liquid resin, and read the resin's safety data sheet. Our curing resin prints guide has a section on a resin workspace, ventilation and the wash and cure station.
Activated-carbon air purifier for resin printer enclosures · 2 units
ELEGOO
In your market the shops we track list ELEGOO's mini air purifier, which is for resin printer enclosures, but not a resin tent.
Filters, heaters and fans for FDM
An enclosure is the box. The parts that go with it are an air filter, a chamber heater and an exhaust fan, and each is made for specific printers. QIDI sells a 3-in-1 air filter for its Plus5 / Q2 and Max4 printers, Creality sells an FDM air purifier rated by its maker at 250 m³/h, and QIDI and Bambu Lab make chamber heaters and exhaust fans for their own printers. Check the model number before you buy: these are not universal.

Replacement chamber air filter · Max4
QIDI Tech

Replacement chamber air filter · Plus5 / Q2 / Q2C
QIDI Tech

Air purifier for 3D printing, FDM-printer version · 250 m3/h · 1000 hours
Creality
What to buy
- ABS or ASA on an open printer: a tent or a purpose-built enclosure that matches your printer.
- A Bambu Lab, Creality or QIDI with its own enclosure option: the maker's own, first.
- A resin printer in a shared room: a ventilated enclosure or an air purifier, plus a window.
- A PLA printer in a quiet corner: probably nothing. Spend it on a filament dryer and proper filament storage instead.
If you are also deciding what to print on, best 3D printer for beginners covers the machines, and the workspace as a whole is in how to set up a miniature painting station.
Tips
- Check the printer fits before you buy a rigid enclosure, and the filament spool and cables too.
- Check your printer maker's chamber temperature limit before you close it in.
- Do not seal a PLA printer without a way for the heat to escape.
- A closed box needs a vent or filter for ABS, ASA and resin, or it concentrates the fumes.
- Ventilate the room, whatever the box does.
Questions
Do I need an enclosure for a 3D printer?
For ABS and ASA, yes. For PLA and PETG, usually not. For resin, a warm, ventilated spot matters more than a sealed box.
Does an enclosure remove 3D printer fumes?
Not by itself. An enclosure with an activated-carbon filter or a vent to outside helps, and the room still needs ventilation.
Can I enclose a PLA printer?
You can, but trapped heat can soften PLA, so check your filament maker's limits and leave a way for heat to escape.
Tent or rigid enclosure?
A tent is cheaper and fits more printers. A rigid enclosure holds heat better and looks tidier. A purpose-built one is simplest if it exists for your printer.
Do resin printers need an enclosure?
Not strictly, but resin works best at a steady temperature and gives off a smell, so a ventilated cabinet or tent with a purifier is a common choice.
We compare what the makers and the shops we track publish, and their prices; we have not used these enclosures ourselves.
